Systema M4MAX with MI forearm

Trader rating · February 23rd, 2008, 20:22

Ok, just finished this. Thanks again to McGuyver for supplying an endless stream of technical knowledge.

The Midwest Industries Two-Piece drop-in forearm (p/n MCTAR17) is marketed as a drop-in replacement for stock handguards on any non-Colt AR15. Unfortunately, it doesn't fit the Systema out of the box, and requires some minor modification and a LOT of effort to fit it properly.

Anyway, I'm pleased with how it turned out. Now if the weather would hurry up and warm the fuck up, I could throw some proper paint on this naked bitch.

Goodl2ussian · February 23rd, 2008, 20:45

simple and clean.

I like! a lot actually

Trader rating · February 23rd, 2008, 20:46

As Viking said to me, "looks like it just came off the armory gun rack".

Goodl2ussian · February 23rd, 2008, 20:52

yup agreed

KEVORKIAN · February 23rd, 2008, 21:04

Is that Acog fron Huang?

stokes · February 23rd, 2008, 21:15

What types of modification was needed?

Lakonian · February 23rd, 2008, 21:59

Looks awesome. My M4 is in need of some rails. I really dislike the standard handguards.

mcguyver · February 23rd, 2008, 22:22

Good to see it worked out Morbius.

Renegade) · February 23rd, 2008, 22:52

+1 to all said, very nice PTW Morb

Donster · February 23rd, 2008, 22:58

very sexy!

El Cactus Loco · February 24th, 2008, 16:26

very very nice! plz dont paint her tho, imho coloured furniture is the way to go.... rail covers and the like. unless you were planning that anyways, in which case never mind me!

Trader rating · February 24th, 2008, 18:00

It's a tool, not a decoration to look at. It'll get painted.

Medic · February 24th, 2008, 21:12

I can taste the Whiskey and smell the Krylon from here

How much grinding??

Trader rating · February 25th, 2008, 09:05

About an 8th of an inch on each of the four points.

wildcard · February 25th, 2008, 10:23

I would just leave it naked it looks hot as it is

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

February 23rd, 2008, 20:22	#1
MadMorbius Guest Trader rating	Systema M4MAX with MI forearm Ok, just finished this. Thanks again to McGuyver for supplying an endless stream of technical knowledge. The Midwest Industries Two-Piece drop-in forearm (p/n MCTAR17) is marketed as a drop-in replacement for stock handguards on any non-Colt AR15. Unfortunately, it doesn't fit the Systema out of the box, and requires some minor modification and a LOT of effort to fit it properly. Anyway, I'm pleased with how it turned out. Now if the weather would hurry up and warm the fuck up, I could throw some proper paint on this naked bitch. Last edited by MadMorbius; October 29th, 2008 at 14:18..

February 23rd, 2008, 21:04	#5
KEVORKIAN Trader rating Join Date: Nov 2006 Location: Manitoba	Is that Acog fron Huang? __________________ Kevorkian I SUPPORT THE USE OF SILICA BB BASTARDS!

February 23rd, 2008, 22:22	#8
mcguyver Trader rating Join Date: Aug 2005 Location: Northern Alberta	Good to see it worked out Morbius. __________________ Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy.

February 23rd, 2008, 20:45	#2
Goodl2ussian Trader rating Join Date: Oct 2007 Location: Calgary, AB	simple and clean. I like! a lot actually

February 23rd, 2008, 20:46	#3
MadMorbius Guest Trader rating	As Viking said to me, "looks like it just came off the armory gun rack".

February 23rd, 2008, 20:52	#4
Goodl2ussian Trader rating Join Date: Oct 2007 Location: Calgary, AB	yup agreed

February 23rd, 2008, 21:15	#6
stokes Trader rating Join Date: Dec 2005 Location: Toronto	What types of modification was needed?

February 23rd, 2008, 21:59	#7
Lakonian kos Trader rating Join Date: Feb 2006 Location: Wherever.	Looks awesome. My M4 is in need of some rails. I really dislike the standard handguards.

February 23rd, 2008, 22:52	#9
Renegade) A Total Bastard Trader rating Join Date: Apr 2006 Location: Tottenham, Ontario	+1 to all said, very nice PTW Morb __________________ W1-5

February 23rd, 2008, 22:58	#10
Donster Trader rating Join Date: Jul 2007 Location: GTA	very sexy!

February 24th, 2008, 16:26	#11
El Cactus Loco Trader rating Join Date: Nov 2007 Location: ottawa	very very nice! plz dont paint her tho, imho coloured furniture is the way to go.... rail covers and the like. unless you were planning that anyways, in which case never mind me!

February 24th, 2008, 18:00	#12
MadMorbius Guest Trader rating	It's a tool, not a decoration to look at. It'll get painted.

February 24th, 2008, 21:12	#13
Medic Trader rating Join Date: Nov 2006 Location: Fergus, ON	I can taste the Whiskey and smell the Krylon from here How much grinding?? __________________ 42 Doc Scraping stupid out of ditches since 1995

February 25th, 2008, 09:05	#14
MadMorbius Guest Trader rating	About an 8th of an inch on each of the four points.

February 25th, 2008, 10:23	#15
wildcard Trader rating Join Date: Dec 2001 Location: In my man cave	I would just leave it naked it looks hot as it is

Systema M4MAX with MI forearm

Airsoft Guns Discussion