G36 motor binding

p.phresh · March 2nd, 2006, 13:59

here's the problem, taken from my review of the star g36, on this thread:
http://www.airsoftcanada.com/showthread.php?t=24622

-----

After testing the ROF and FPS, i took a high-cap and proceeded to shoot it to adjust the hop up and start adjusting the 3.5x scope. Before i could finish the one midcap (140rds), provided with the gun, it began acting up. The motor seemed like it was seizing up and something was binding and it didn't want to turn.

The first day and something is wrong with the gun... tsk tsk.
I've taken the gun completely apart and found that when the mechbox is not in the gun, this doesn't happen. But as soon as it's back inside the upper reciever, it begins acting like the battery is too weak and the motor can't push the spring.

------

i'd also like to add that it seems to be a clone of TM's G36, so i'd like to see if anyone has any suggestions as to what they think might be the cause of error.

p.phresh · March 9th, 2006, 10:16

I swapped the stock Star motor with a CA High Torque motor found in their AK and Aug series guns, and it worked like a charm!

Someone suggested it might be the motor, and i can't remember who it was that said it, but i owe you a coke!

It runs great, on a mini 9.6 battery, its ROF is 14. I haven't had any issues since putting in the new motor, except that the battery dies cause i fire it too much.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

March 2nd, 2006, 13:59	#1
p.phresh Trader rating Join Date: Sep 2004 Location: Winnipeg, MB	G36 motor binding here's the problem, taken from my review of the star g36, on this thread: http://www.airsoftcanada.com/showthread.php?t=24622 ----- After testing the ROF and FPS, i took a high-cap and proceeded to shoot it to adjust the hop up and start adjusting the 3.5x scope. Before i could finish the one midcap (140rds), provided with the gun, it began acting up. The motor seemed like it was seizing up and something was binding and it didn't want to turn. The first day and something is wrong with the gun... tsk tsk. I've taken the gun completely apart and found that when the mechbox is not in the gun, this doesn't happen. But as soon as it's back inside the upper reciever, it begins acting like the battery is too weak and the motor can't push the spring. ------ i'd also like to add that it seems to be a clone of TM's G36, so i'd like to see if anyone has any suggestions as to what they think might be the cause of error.

March 9th, 2006, 10:16	#2
p.phresh Trader rating Join Date: Sep 2004 Location: Winnipeg, MB	I swapped the stock Star motor with a CA High Torque motor found in their AK and Aug series guns, and it worked like a charm! Someone suggested it might be the motor, and i can't remember who it was that said it, but i owe you a coke! It runs great, on a mini 9.6 battery, its ROF is 14. I haven't had any issues since putting in the new motor, except that the battery dies cause i fire it too much.

G36 motor binding

Doctor's Corner