KWA G18C Takedown Help and problems

Rmyof1.5 · January 13th, 2006, 22:24

Two days ago I was shooting my KWA G18C like I normally would. I loaded it up, racked the slide back to chamber a round and attempted to shoot it on semi. The slide didn't go all the way back and all my gas shot out. I looked at the feeding ramp and the left side of it was chipped. As of yesterday I ordered to replacement feeding ramps from WGCShop.com. I don't know when they will arrive. I've had it cleaned and double checked. I was also reading in the doctors corner section about people with similar problems and fixes. I'm now trying to test those theories but I can't do that if the slide isn't taken apart. That's my reason. ( The closest airsoft walk in store closest to me is 60 something miles away) Sorry about the confusion.

JohnnyDo · January 13th, 2006, 22:33

why are you taking it apart? but have you tried to look at a parts diagram in your manual or avliable here on the forum in the Doctors Cornor area. There isa sticky with a link holding tons of manuals and parts diagrams.

next, i'll warn you right now that if you are asking how to take it apart, you probably should not do it but let it be looked at by an experianced person.

that being said. there is two pins, one just above the triger and the other is on the nad grip near the slide. these two pins have to be pushed out. you will notice though that springs and parts offten fly off if you don't know where to catch them. if you dissasemble the lower half of the glock, it's a real pain in the but to assemble it back together again.

btw, this is in the wrong section, you shoudl post int he Doctors Cornor section.

cheers

Rmyof1.5 · January 13th, 2006, 22:36

Sorry about that. I thought it says not to post questions in there but only solved ones. And I'm taking it apart becuase i have a big game in a week but the closest airsoft walk in store is 60 something miles away......*sniffles*

TheYellowDart · January 13th, 2006, 23:28

These links should help you with taking apart your pistol.

http://www.arniesairsoft.co.uk/forum...php/t8345.html

http://www.unconventional-airsoft.co...18c-hammer.php

JohnnyDo · January 14th, 2006, 03:10

whats wrong with the gun that makes you feel taking it apart will help?

and the Doctoprs section on teh forum has two sub section for GBB and AEG's. the main section you post questions, the sub section is for solved/fixed cases which have been moved from the main section.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

January 13th, 2006, 22:24	#1
Rmyof1.5 Trader rating Join Date: Dec 2005 Location: United States	KWA G18C Takedown Help and problems Two days ago I was shooting my KWA G18C like I normally would. I loaded it up, racked the slide back to chamber a round and attempted to shoot it on semi. The slide didn't go all the way back and all my gas shot out. I looked at the feeding ramp and the left side of it was chipped. As of yesterday I ordered to replacement feeding ramps from WGCShop.com. I don't know when they will arrive. I've had it cleaned and double checked. I was also reading in the doctors corner section about people with similar problems and fixes. I'm now trying to test those theories but I can't do that if the slide isn't taken apart. That's my reason. ( The closest airsoft walk in store closest to me is 60 something miles away) Sorry about the confusion.

January 13th, 2006, 22:33	#2
JohnnyDo Trader rating Join Date: Apr 2005 Location: Calgary, AB	why are you taking it apart? but have you tried to look at a parts diagram in your manual or avliable here on the forum in the Doctors Cornor area. There isa sticky with a link holding tons of manuals and parts diagrams. next, i'll warn you right now that if you are asking how to take it apart, you probably should not do it but let it be looked at by an experianced person. that being said. there is two pins, one just above the triger and the other is on the nad grip near the slide. these two pins have to be pushed out. you will notice though that springs and parts offten fly off if you don't know where to catch them. if you dissasemble the lower half of the glock, it's a real pain in the but to assemble it back together again. btw, this is in the wrong section, you shoudl post int he Doctors Cornor section. cheers

January 13th, 2006, 22:36	#3
Rmyof1.5 Trader rating Join Date: Dec 2005 Location: United States	Sorry about that. I thought it says not to post questions in there but only solved ones. And I'm taking it apart becuase i have a big game in a week but the closest airsoft walk in store is 60 something miles away......sniffles

January 13th, 2006, 23:28	#4
TheYellowDart Myoga Trader rating Join Date: Aug 2003 Location: Vancouver, BC	These links should help you with taking apart your pistol. http://www.arniesairsoft.co.uk/forum...php/t8345.html http://www.unconventional-airsoft.co...18c-hammer.php

January 14th, 2006, 03:10	#5
JohnnyDo Trader rating Join Date: Apr 2005 Location: Calgary, AB	whats wrong with the gun that makes you feel taking it apart will help? and the Doctoprs section on teh forum has two sub section for GBB and AEG's. the main section you post questions, the sub section is for solved/fixed cases which have been moved from the main section.

KWA G18C Takedown Help and problems

Doctor's Corner