NVG Baseplates

BobbyDangerous · January 22nd, 2017, 23:07

Are these replaceable or easy to obtain? Or is it easier to try and make one?

"The plate that the JARM screws into.

EOD Steve · January 23rd, 2017, 09:00

When you say "the plate that the j-arm screws into", are you referring to the PVS14 housing?

I'd imagine it would be quite difficult to make one. But it is replaceable.

BobbyDangerous · January 25th, 2017, 17:22

I'm just gonna mill something myself. I contacted the company and they don't carry a replacement. I'll just do it myself.

Thanx man

pestobanana · January 25th, 2017, 17:48

Lolwat

BobbyDangerous · January 25th, 2017, 19:33

Cut a piece of metal to size shape it and drill and tap and install?

Not very difficult.

I'm not afraid to open the unit up. I already have a few times to take specific measurements and It still works. I work with electronics and such for a living so it's not intimidating for me.

BobbyDangerous · January 31st, 2017, 01:11

All good I made something.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

January 22nd, 2017, 23:07	#1
BobbyDangerous Trader rating Join Date: Mar 2010 Location: Oshawa	NVG Baseplates Are these replaceable or easy to obtain? Or is it easier to try and make one? "The plate that the JARM screws into. __________________ -Dangerous- BA Level 3 Certified

January 23rd, 2017, 09:00	#2
EOD Steve Trader rating Join Date: Jun 2012	When you say "the plate that the j-arm screws into", are you referring to the PVS14 housing? I'd imagine it would be quite difficult to make one. But it is replaceable. __________________ The Steve has spoken.

January 25th, 2017, 17:22	#3
BobbyDangerous Trader rating Join Date: Mar 2010 Location: Oshawa	I'm just gonna mill something myself. I contacted the company and they don't carry a replacement. I'll just do it myself. Thanx man __________________ -Dangerous- BA Level 3 Certified

January 25th, 2017, 17:48	#4
pestobanana Squid Porn Superstar, I love the tentacles! Trader rating Join Date: Nov 2008 Location: Richmond Hill and Waterloo, Ontario	Lolwat

January 25th, 2017, 19:33	#5
BobbyDangerous Trader rating Join Date: Mar 2010 Location: Oshawa	Cut a piece of metal to size shape it and drill and tap and install? Not very difficult. I'm not afraid to open the unit up. I already have a few times to take specific measurements and It still works. I work with electronics and such for a living so it's not intimidating for me. __________________ -Dangerous- BA Level 3 Certified

January 31st, 2017, 01:11	#6
BobbyDangerous Trader rating Join Date: Mar 2010 Location: Oshawa	All good I made something. __________________ -Dangerous- BA Level 3 Certified

NVG Baseplates

Gear Discussion