|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
November 8th, 2005, 22:02
|
#1 |
|
AEG Fuses
Hey,
I was wondering what kind of fuses are usually used in stock guns, and in upgraded guns? |
|
|
|
November 8th, 2005, 22:12
|
#2 |
|
15 amp agc (glass) is sufficient for all guns. if you repeatedly blow that fuse, you have a problem that needs attention or it will cost you a failed component.
|
|
|
|
|
November 8th, 2005, 22:14
|
#3 |
|
Guest
|
dime a dozen(not really, but cheap) at canadian tire
|
|
|
|
November 8th, 2005, 22:20
|
#4 |
|
|
thanks, I have about a million fuses in my basement, just I wans't sure which to use
|
|
|
|
|
November 9th, 2005, 09:45
|
#5 |
|
Official ASC Bladesmith
|
Standard automotive glass tube 1 1/4" fuses. Stock, as mcguyver said, is 15A, but if you put in a heavier spring, you'll need to toss in a 25A fuse (30A are easier to find and are better than no fuse). Canadian Tire has them in the automotive department if you can't find the right ones in your basement. BTW, the voltage rating doesn't matter. I get my 25A and 30A fuses from work, and the only ones I can find with that rating have voltage ratings of 32V, so even 115V rating is good. As long as it's over 10V you will be fine.
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
