Two Gas Guns, Same Mag Problem?

Merlin Coryell · October 6th, 2005, 19:33

I recently purchased a new KJW Para FMV and a used Maruzen P99. From the first test of the P99 I would only get 5-10 shots off before the mag was empty of gas. Sometimes it wouldnt even cycle the slide all the way but it seems to do so now. I checked seals and put some lube in it, but no difference. Now my brand new KJW Para is doing the same thing.

I have tried both 134 and a little Green Gas on the P99 and Green Gas only on the Para. No differences. I did spray some oil on the mag at the fill valve, release button and a tiny bit into the top of the mag well itself.

Could both of these just be a problem of over lubrication? Is this a common problem or did I get two lemons? Para worked great until now, yet its only had about 10mags at the most shot through it.

Thanks.

Kid · October 6th, 2005, 19:35

when you fill this gun, are you making sure to hold the bottle of duster/green so the nozzle is directed downwards?
(by the way, get a propane adapter!)

666 · October 6th, 2005, 19:40

Read through this topic, it mostly covers KJ 1911, but it does have some info about P14. Apparently P14 mags have issues with o-rings.
http://www.arniesairsoft.co.uk/forum...topic=3203&hl=

Merlin Coryell · October 7th, 2005, 08:03

Im running it by Jungletoy this Sat, where I bought it. Ill keep a close eye on what he does to fix it and hopefully the same will apply to my P99 mag. Sure seems like the exact same problem - seals.

CDN_Stalker · October 7th, 2005, 12:07

If it was the seals, you'd hear the leak. Maybe fill it and immerse it in water (or wipe dishsoap on the seams) to see if bubbles form.

denli21 · October 7th, 2005, 17:16

i had that problem before with my TM M92F, i just filled the mag with green gas and let it sit for a week or so...tested it after a week and all was fine.

Merlin Coryell · October 11th, 2005, 17:43

Any ideas where to get the incredibly small orings needed for Magazine valves? I found a few of the larger ones.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

October 6th, 2005, 19:33	#1
Merlin Coryell Trader rating Join Date: Sep 2005 Location: Houston	Two Gas Guns, Same Mag Problem? I recently purchased a new KJW Para FMV and a used Maruzen P99. From the first test of the P99 I would only get 5-10 shots off before the mag was empty of gas. Sometimes it wouldnt even cycle the slide all the way but it seems to do so now. I checked seals and put some lube in it, but no difference. Now my brand new KJW Para is doing the same thing. I have tried both 134 and a little Green Gas on the P99 and Green Gas only on the Para. No differences. I did spray some oil on the mag at the fill valve, release button and a tiny bit into the top of the mag well itself. Could both of these just be a problem of over lubrication? Is this a common problem or did I get two lemons? Para worked great until now, yet its only had about 10mags at the most shot through it. Thanks.

October 6th, 2005, 19:40	#3
666 Trader rating Join Date: Jul 2004 Location: Toronto, Ontario	Read through this topic, it mostly covers KJ 1911, but it does have some info about P14. Apparently P14 mags have issues with o-rings. http://www.arniesairsoft.co.uk/forum...topic=3203&hl= __________________ Op Woodsman. Biggest WW2 event in Ontario.

October 7th, 2005, 12:07	#5
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	If it was the seals, you'd hear the leak. Maybe fill it and immerse it in water (or wipe dishsoap on the seams) to see if bubbles form. __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

October 6th, 2005, 19:35	#2
Kid Trader rating Join Date: Feb 2005 Location: Moose Jaw, SK	when you fill this gun, are you making sure to hold the bottle of duster/green so the nozzle is directed downwards? (by the way, get a propane adapter!)

October 7th, 2005, 08:03	#4
Merlin Coryell Trader rating Join Date: Sep 2005 Location: Houston	Im running it by Jungletoy this Sat, where I bought it. Ill keep a close eye on what he does to fix it and hopefully the same will apply to my P99 mag. Sure seems like the exact same problem - seals.

October 7th, 2005, 17:16	#6
denli21 Trader rating Join Date: Apr 2003 Location: Brampton	i had that problem before with my TM M92F, i just filled the mag with green gas and let it sit for a week or so...tested it after a week and all was fine. __________________ .:TM M4A1 / TM M92F:. My old Buy and Sell Rating

October 11th, 2005, 17:43	#7
Merlin Coryell Trader rating Join Date: Sep 2005 Location: Houston	Any ideas where to get the incredibly small orings needed for Magazine valves? I found a few of the larger ones.

Two Gas Guns, Same Mag Problem?

Doctor's Corner