Question about gears....

buttonsHT · June 14th, 2013, 17:20

So I purchased a used TM MP5 that wasn't working properly. I've never disassembled an AEG before and figured I'd give it a try on this one using an online guide. Things went well and I didn't lose any screws or springs. Now once the gearbox was open I found this....

This seems to be the only damaged part in the gun. Can anyone tell me what would cause this? Or anything I should look at for damage?

It's a stock MP5. Nothing special in it.

Thanks

PS. I did order some new gears from AirsoftStore so I'll have those next week to install and get it back together.

ThunderCactus · June 14th, 2013, 17:34

gun probably jammed at some point, maybe a BB got stuck in the barrel, sector gear picked up the piston before it was all the way forward, and the mechanical shock of the mechbox coming to a complete stop was taken out at it's weakest point. In this case, the teeth on the spur gear. Some gears are much weaker than others.

Inspect the piston for damage, otherwise pick all the teeth out of the box, install and shim the new gearset.

buttonsHT · June 14th, 2013, 17:54

Thanks for the tip.

I completely forgot about shimming (i read up on changing gears a million times last night) so I just messaged Stealth about grabbing some.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

June 14th, 2013, 17:20	#1
buttonsHT Trader rating Join Date: Feb 2013 Location: Burlington	Question about gears.... So I purchased a used TM MP5 that wasn't working properly. I've never disassembled an AEG before and figured I'd give it a try on this one using an online guide. Things went well and I didn't lose any screws or springs. Now once the gearbox was open I found this.... This seems to be the only damaged part in the gun. Can anyone tell me what would cause this? Or anything I should look at for damage? It's a stock MP5. Nothing special in it. Thanks PS. I did order some new gears from AirsoftStore so I'll have those next week to install and get it back together.

June 14th, 2013, 17:34	#2
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	gun probably jammed at some point, maybe a BB got stuck in the barrel, sector gear picked up the piston before it was all the way forward, and the mechanical shock of the mechbox coming to a complete stop was taken out at it's weakest point. In this case, the teeth on the spur gear. Some gears are much weaker than others. Inspect the piston for damage, otherwise pick all the teeth out of the box, install and shim the new gearset.

June 14th, 2013, 17:54	#3
buttonsHT Trader rating Join Date: Feb 2013 Location: Burlington	Thanks for the tip. I completely forgot about shimming (i read up on changing gears a million times last night) so I just messaged Stealth about grabbing some.

Question about gears....

Airsoft Guns Discussion