|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
August 1st, 2005, 15:23
|
#1 |
|
So this part flies out of my KSC G23F...
And it looks like the front part of this:
http://www.wgcshop.com/pcart/shopper...G18-24_cat_KSC Parts I suspect that this is the KSC floating valve. The part is broken at the stem. I have the front part with fins on my desk and the broken base still sitting inside my loading nozzle at the moment. What caused the failure? Should I simply replace the part with a OEM KSC one or order the Firefly rocket valve? For reference, I have a FMU G23F with stock valves, reinforced/stiffened recoil spring guide set, stock hammer spring. And a steel mag catch, if that makes a difference.
__________________
Contras A-06: F**k it, we'll do it live. 修身齊家治國平天下 |
|
|
|
August 1st, 2005, 15:43
|
#2 |
What kind of gas were you using in it, and had you been keeping up with your regular maintenance?
|
|
|
|
|
|
August 1st, 2005, 16:25
|
#3 |
|
Apparently this is happening in many peoples G23F's. Very strange, I have owned several of the full auto Glocks made by KSC/KWA and never had the stock floating valve break, even using red gas (ET1600). Get the Firefly floating valve, it is a good piece, although, the winged tip may blow off like what happened with your stock one, it still works fine. I have 3 KSC G19s with the firefly floating valve, they all blew the tip off but they all shoot 100% with the tip gone.
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
