Issues With SRC G36...

Michael__5 · May 23rd, 2010, 17:12

Ok, so recently I was at a scrim, firing away, when my gun stopped shooting. I still haven't been able to figure out what's wrong with it. When I pull the trigger with the battery connected, I can feel trigger response (there is just that slight resistance), but nothing else. Any suggestions would be appreciated...

Kos-Mos · May 23rd, 2010, 20:57

You are using a small/discharged battery and you jammed the mechbox?

Michael__5 · May 23rd, 2010, 21:00

Ok, thanks for the reply...so to be clear, when my battery was dying down, the mech box jammed. How would I fix this problem, or is it off to a gun doc?

Kos-Mos · May 23rd, 2010, 21:08

Cycle it with a very larger battery, or trigger the anti-reversal latch. (If you don't know what it is, better off going to a gundoc)

Baows · May 23rd, 2010, 21:11

Depending on how comfortable you are with opening your gun up, you could always try to diagnose the issue yourself.

It could just be a jam, try the following:

http://www.mechbox.com/g36/g36c-disassembly.html

Michael__5 · May 23rd, 2010, 21:13

Thanks! But I have annother scrim next weekend, so if it is at all possible, could you tell me how to trigger the anti-reversal latch to do it myself and avoid using a s*** loaner then, 'Banghead' haha

Edit: Thanks for the link Josh, I certainly will try that, but once I get the mechbox out, how would I know if it is jammed?

Gunny_McSmith · May 23rd, 2010, 23:22

Quote:

Originally Posted by Michael__5

Thanks! But I have annother scrim next weekend, so if it is at all possible, could you tell me how to trigger the anti-reversal latch to do it myself and avoid using a s*** loaner then, 'Banghead' haha

Edit: Thanks for the link Josh, I certainly will try that, but once I get the mechbox out, how would I know if it is jammed?

common sense..... and logical thinking... since you're doing it yourself... :P

BTW: dont touch the gear shimming when you open the gearbox, or you'll have serious problesm with your gun....

PS: what battery are you using?

Michael__5 · May 23rd, 2010, 23:29

Ok, well common sense seems when it comes to fixing guns seems to forget to include me haha, but I have a 9.6v 1600 mah battery. Is this the cause of the problem?

What kind of battery could I use to unjam the mechbox? Would using a large battery not be hard on the gun?

Gunny_McSmith · May 23rd, 2010, 23:52

Quote:

Originally Posted by Michael__5

Ok, well common sense seems when it comes to fixing guns seems to forget to include me haha, but I have a 9.6v 1600 mah battery. Is this the cause of the problem?

well... depends also on your fps...

but ya... opening a mechbox is easy... but putting it back together is the tough part... XD

but seriously, when you open the gearbox or even before opening one, do your research, and try to figure out how it works....

andrew5826 · May 24th, 2010, 02:08

did you try shooting it with a charged battery yet?

Baows · May 24th, 2010, 02:21

That's exactly how I learned. I went to that site and found a tutorial for one of my guns. Watched it a couple times, said "screw this" and opened the gun up and learned for myself. Was a rough run, took me about a month of tinkering with things to get it all back together. I even cracked open the gearbox and had a feel for that too!

Ohh s*** will I do that again? Probably, but with a cheaper gun that I don't mind if I screw it up.

etd · May 24th, 2010, 02:53

If it's a stock new gen src you are hitting just below 400fps. Charge your battery and try firing a shot in semi. If that doesn't work to be honest I doubt cycling the ant reversal latch will work as this would man there is a more serious problem. A 9.6 mah should easily be able to handle that spring coupled with torque gears.

Michael__5 · May 24th, 2010, 07:36

So I have tried cycling it with a charged battery and nothing happens still, is opening the mechbox the only other way to diagnose this problem?

kalnaren · May 24th, 2010, 09:41

Pull the mechbox out of the G36. There's a takedown video on www.mechbox.com to show you how to do this.

Take the motor off. Grab a pair of needlenose pliars, pull up (gently) on the little latch that sits against the bevel gear (through where the motor connects). The mechbox should unwind.

Gunny_McSmith · May 24th, 2010, 12:44

Quote:

Originally Posted by Josh Hilliker

That's exactly how I learned. I went to that site and found a tutorial for one of my guns. Watched it a couple times, said "screw this" and opened the gun up and learned for myself. Was a rough run, took me about a month of tinkering with things to get it all back together. I even cracked open the gearbox and had a feel for that too!

Ohh s*** will I do that again? Probably, but with a cheaper gun that I don't mind if I screw it up.

I had to chance to practice on walmart m4 crapsoft gearbox before opening mine... :P

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

May 23rd, 2010, 17:12	#1
Michael__5 Trader rating Join Date: Jan 2010 Location: GTA, Ontario	Issues With SRC G36... Ok, so recently I was at a scrim, firing away, when my gun stopped shooting. I still haven't been able to figure out what's wrong with it. When I pull the trigger with the battery connected, I can feel trigger response (there is just that slight resistance), but nothing else. Any suggestions would be appreciated... Last edited by Michael__5; May 23rd, 2010 at 18:59..

May 23rd, 2010, 21:13	#6
Michael__5 Trader rating Join Date: Jan 2010 Location: GTA, Ontario	Thanks! But I have annother scrim next weekend, so if it is at all possible, could you tell me how to trigger the anti-reversal latch to do it myself and avoid using a s*** loaner then, 'Banghead' haha Edit: Thanks for the link Josh, I certainly will try that, but once I get the mechbox out, how would I know if it is jammed? Last edited by Michael__5; May 23rd, 2010 at 21:21..

May 23rd, 2010, 23:29	#8
Michael__5 Trader rating Join Date: Jan 2010 Location: GTA, Ontario	Ok, well common sense seems when it comes to fixing guns seems to forget to include me haha, but I have a 9.6v 1600 mah battery. Is this the cause of the problem? What kind of battery could I use to unjam the mechbox? Would using a large battery not be hard on the gun? Last edited by Michael__5; May 23rd, 2010 at 23:50..

May 23rd, 2010, 21:00	#3
Michael__5 Trader rating Join Date: Jan 2010 Location: GTA, Ontario	Ok, thanks for the reply...so to be clear, when my battery was dying down, the mech box jammed. How would I fix this problem, or is it off to a gun doc?

May 23rd, 2010, 21:11	#5
Baows formerly Josh Hilliker Trader rating Join Date: Dec 2009 Location: GTA	Depending on how comfortable you are with opening your gun up, you could always try to diagnose the issue yourself. It could just be a jam, try the following: http://www.mechbox.com/g36/g36c-disassembly.html

May 24th, 2010, 02:08	#10
andrew5826 Trader rating Join Date: Aug 2009 Location: Burnaby BC	did you try shooting it with a charged battery yet?

May 24th, 2010, 02:21	#11
Baows formerly Josh Hilliker Trader rating Join Date: Dec 2009 Location: GTA	That's exactly how I learned. I went to that site and found a tutorial for one of my guns. Watched it a couple times, said "screw this" and opened the gun up and learned for myself. Was a rough run, took me about a month of tinkering with things to get it all back together. I even cracked open the gearbox and had a feel for that too! Ohh s*** will I do that again? Probably, but with a cheaper gun that I don't mind if I screw it up.

May 24th, 2010, 02:53	#12
etd Trader rating Join Date: May 2008 Location: North Bay, Ontario	If it's a stock new gen src you are hitting just below 400fps. Charge your battery and try firing a shot in semi. If that doesn't work to be honest I doubt cycling the ant reversal latch will work as this would man there is a more serious problem. A 9.6 mah should easily be able to handle that spring coupled with torque gears. __________________ etd/Carmelo - Team North Bay v3 Aeg specialist

May 24th, 2010, 07:36	#13
Michael__5 Trader rating Join Date: Jan 2010 Location: GTA, Ontario	So I have tried cycling it with a charged battery and nothing happens still, is opening the mechbox the only other way to diagnose this problem?

Issues With SRC G36...

Doctor's Corner