|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
May 18th, 2010, 23:53
|
#1 |
|
Joeyaglr444
|
Does the ICS Hop Up unit have to be able to move?
My Hop up unit and barrel are now snug in the new steel outter barrel I installed does it need to be able to spring in and out cause at this point it doesn't move at all it is snug in place.
__________________
It's not about the guy who doesn't call his hit. It's about the pants you're wearing and the pants you're team mate is wearing, Is it real multi cam or is it Chinese repro multi cam? I don't know but in the end it's still multicam. |
|
|
|
May 18th, 2010, 23:56
|
#2 |
|
No it should be snug up to your mechbox.
__________________
 Airsoft Sales and Repair/Upgrade Services |
|
|
|
|
May 19th, 2010, 00:12
|
#3 |
|
Joeyaglr444
|
so snug to the box not towards the barrel assembly?
__________________
It's not about the guy who doesn't call his hit. It's about the pants you're wearing and the pants you're team mate is wearing, Is it real multi cam or is it Chinese repro multi cam? I don't know but in the end it's still multicam. |
|
|
|
|
May 19th, 2010, 00:45
|
#4 |
|
There's a spring in there that pushes the chamber back against the upper gearbox. It should be there, the chamber should move, and that spring provides the tension against the gearbox.
At times when I installed new outerbarrels, I filed down the guide tabs on the sides of the chamber so it would move freely inside the outerbarrel.
__________________
Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy. |
|
|
|
|
May 19th, 2010, 00:49
|
#5 |
|
Joeyaglr444
|
I have that spring but its really tight in there Ill sand it until it slides in and out easier(TWSS) at this point the hop up is right up against the mechbox.
__________________
It's not about the guy who doesn't call his hit. It's about the pants you're wearing and the pants you're team mate is wearing, Is it real multi cam or is it Chinese repro multi cam? I don't know but in the end it's still multicam. |
|
|
|
|
May 19th, 2010, 23:27
|
#6 | |
|
You have to open-up the tabs in the outerbarrel to fit the ICS hop-up.
You can also use a regular hop-up unit, just have to shave of the front part of the square reinforcement at the feed tube.
__________________
Quote:
|
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
