TM Glock 17 slide stuck

juicy · April 30th, 2010, 09:29

Problem appears to be that the hammer dropped while the slide was racked back. As a result, the slide is stuck and refuses to return to battery on it's own. Looks like the hammer bearing thing is caught on the BBU... but from further reading, apparently KSC's have the same problem when the recoil guide rod is installed incorrectly.

Is this a common problem, any suggestions to fix this problem, and can someone confirm that my diagnosis is correct? Help with any of those three would be awesome.

juicy · April 30th, 2010, 09:34

Actually, I figured it out. Disconnector part looked like it was pushing into the BBU prematurely. I just confirmed that this is the problem. Solution is to take something and push down on the little black stub that is the disconnector. If you're pointing the muzzle away from you, the disconnector is on the right side of the frame, next to the hammer.

Could this be an issue of this Glock being brand new? It seems as if the disconnector is a little stiff. Could this be an issue of me needing one of those Guarder steel trigger bars? I'm not too sure, as I'm not 100% familiar with the inner working of Glock's yet.

juicy · May 1st, 2010, 00:17

Could this part here (click for link) do the trick for the trigger lever getting stuck under the BBU?

juicy · May 3rd, 2010, 15:15

So... what does the Guarder Trigger Lever Bar for TM G17's actually repair anyway? Ehobby mentions something about "solves stuck problem", so I was thinking that my trigger bar + BBU getting stuck on each other-issue isn't uncommon... C'mon, there's gotta be someone that knows this stuff?

juicy · May 10th, 2010, 17:45

So... Guarder Trigger Lever Bar thing? Any ideas if that'll help fix my problem or not?

juicy · May 10th, 2010, 23:05

"Steel work, Hardness, solve original slipped problem" is what Ehobby says in the item description... therefore... would this help?

AngelusNex · May 11th, 2010, 07:31

Can't help but it has to be said about this thread, LOL I can't belive nobody's even posted a useless "that sucks man".

-back to your regularly scheduled bumping-

juicy · May 11th, 2010, 12:44

Quote:

Originally Posted by AngelusNex

Can't help but it has to be said about this thread, LOL I can't belive nobody's even posted a useless "that sucks man".

-back to your regularly scheduled bumping-

HAHAHAHAHAHAHAHAHA... thanks for making me get my morning laugh in, Angelus. Now, I'll go sulk in the corner because no one cares about juicy and his new Glock...

-back to my randomly scheduled bumping-

bump.

szetor · May 11th, 2010, 13:11

hey Juicy, I had the same problem with my TM G17..

I posted a while back about this. I'll see if I can dig it up.
But yes, Guarder Steel Trigger Bar did the trick!

juicy · May 11th, 2010, 15:12

Quote:

Originally Posted by szetor

hey Juicy, I had the same problem with my TM G17..

I posted a while back about this. I'll see if I can dig it up.
But yes, Guarder Steel Trigger Bar did the trick!

Hell yes! Just the answer I was looking for! A link would be nice, but it probably won't matter as that order will be going out ASAP.

Thanks a bundle, Szetor.

HaloSix4 · May 11th, 2010, 15:55

I Just had the same problem the Nub on the trigger bar wants to bend, so it gets caught. If you don't have the Guarder bar yet just bend it the opposite direction a bit that will fix it for now.

juicy · May 15th, 2010, 04:23

Sort of. With more than 2 hours of fiddling, I could have probably gotten it to work (not to mention the right pliers... grr). It would work for half a mag, then it wouldn't. I'm about to put in an order for the Guarder part, but thanks for the advice, Halo.

hattrick · May 15th, 2010, 14:49

weird, I had two tm glocks, i sold one. Still running the other into the ground. (I actually toss it a few feet onto the ground after im done firing to make sure she's getting beaten properly.)

Havent run into this issue yet....Maybe i need to throw it harder?

-alex

*EDIT I am brilliant, you haven't been throwing yours enough / at all? That may be your problem!

13Fido13 · May 15th, 2010, 21:57

I'm having the same issue. Mine's been properly beaten.... Let me know if the problem gets solved with that bar juicy...

HaloSix4 · May 15th, 2010, 22:23

got my Guarder Bar yesterday fixed it 100%, but the stock one worked for a while after just a bit of bending.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

April 30th, 2010, 09:29	#1
juicy Trader rating Join Date: Nov 2009 Location: Richmond, BC	TM Glock 17 slide stuck Problem appears to be that the hammer dropped while the slide was racked back. As a result, the slide is stuck and refuses to return to battery on it's own. Looks like the hammer bearing thing is caught on the BBU... but from further reading, apparently KSC's have the same problem when the recoil guide rod is installed incorrectly. Is this a common problem, any suggestions to fix this problem, and can someone confirm that my diagnosis is correct? Help with any of those three would be awesome.

May 15th, 2010, 21:57	#14
13Fido13 Trader rating Join Date: Mar 2007 Location: Sudbury, Ontario	I'm having the same issue. Mine's been properly beaten.... Let me know if the problem gets solved with that bar juicy... __________________ Level 2 BA Certified

April 30th, 2010, 09:34	#2
juicy Trader rating Join Date: Nov 2009 Location: Richmond, BC	Actually, I figured it out. Disconnector part looked like it was pushing into the BBU prematurely. I just confirmed that this is the problem. Solution is to take something and push down on the little black stub that is the disconnector. If you're pointing the muzzle away from you, the disconnector is on the right side of the frame, next to the hammer. Could this be an issue of this Glock being brand new? It seems as if the disconnector is a little stiff. Could this be an issue of me needing one of those Guarder steel trigger bars? I'm not too sure, as I'm not 100% familiar with the inner working of Glock's yet.

May 1st, 2010, 00:17	#3
juicy Trader rating Join Date: Nov 2009 Location: Richmond, BC	Could this part here (click for link) do the trick for the trigger lever getting stuck under the BBU?

May 3rd, 2010, 15:15	#4
juicy Trader rating Join Date: Nov 2009 Location: Richmond, BC	So... what does the Guarder Trigger Lever Bar for TM G17's actually repair anyway? Ehobby mentions something about "solves stuck problem", so I was thinking that my trigger bar + BBU getting stuck on each other-issue isn't uncommon... C'mon, there's gotta be someone that knows this stuff?

May 10th, 2010, 17:45	#5
juicy Trader rating Join Date: Nov 2009 Location: Richmond, BC	So... Guarder Trigger Lever Bar thing? Any ideas if that'll help fix my problem or not?

May 10th, 2010, 23:05	#6
juicy Trader rating Join Date: Nov 2009 Location: Richmond, BC	"Steel work, Hardness, solve original slipped problem" is what Ehobby says in the item description... therefore... would this help?

May 11th, 2010, 07:31	#7
AngelusNex formerly Sepulcrum Trader rating Join Date: May 2007 Location: Kingston,ON, aka Funkasia	Can't help but it has to be said about this thread, LOL I can't belive nobody's even posted a useless "that sucks man". -back to your regularly scheduled bumping-

May 11th, 2010, 13:11	#9
szetor Trader rating Join Date: Feb 2007 Location: Edmonton, AB	hey Juicy, I had the same problem with my TM G17.. I posted a while back about this. I'll see if I can dig it up. But yes, Guarder Steel Trigger Bar did the trick!

May 11th, 2010, 15:55	#11
HaloSix4 aka Halo64 Trader rating Join Date: Jul 2007 Location: Omemee, ON	I Just had the same problem the Nub on the trigger bar wants to bend, so it gets caught. If you don't have the Guarder bar yet just bend it the opposite direction a bit that will fix it for now.

May 15th, 2010, 04:23	#12
juicy Trader rating Join Date: Nov 2009 Location: Richmond, BC	Sort of. With more than 2 hours of fiddling, I could have probably gotten it to work (not to mention the right pliers... grr). It would work for half a mag, then it wouldn't. I'm about to put in an order for the Guarder part, but thanks for the advice, Halo.

May 15th, 2010, 22:23	#15
HaloSix4 aka Halo64 Trader rating Join Date: Jul 2007 Location: Omemee, ON	got my Guarder Bar yesterday fixed it 100%, but the stock one worked for a while after just a bit of bending.

TM Glock 17 slide stuck

Doctor's Corner