KJW using TM based parts?

[Mitchell12]

I've currently got a KJW glock 32c and It's been serving me quite well. I'd be interested in a new outer barrel and slide combo but I can't find a reliable source to say what would actually fit. From what I've read the REAL glock 23 is the same as the 32. So would that mean That the airsoft glock 23 slide and barrel would work?


Thanks!

[Airmax]

Yes that's correct. I've been using my (non Cansoft) KJW OD G32C for the past 3 years and it finally broke down just late last year. I have been using TM parts to upgrade it with little problems so far. So the G23 and G32 interms of parts should work.

[Mitchell12]

Originally Posted by Airmax

Yes that's correct. I've been using my (non Cansoft) KJW OD G32C for the past 3 years and it finally broke down just late last year. I have been using TM parts to upgrade it with little problems so far. So the G23 and G32 interms of parts should work.

I've been having trouble finding slides and barrel's for a 23 though. Any hints?

[Airmax]

Try Redwolf,WGC ,Airsoftparts.ca or any other outlet that has parts for TM G17 glock which is the model cloned for the base of the G23/G32c of KJW.

[Mitchell12]

Originally Posted by Airmax

Try Redwolf,WGC ,Airsoftparts.ca or any other outlet that has parts for TM G17 glock which is the clone model for the G23/G32c of KJW.

The 17 is the 23/32 clone? bomb diggity.

[juicy]

Originally Posted by Mitchell12

The 17 is the 23/32 clone? bomb diggity.

No it's not. AFAIK, the KJW Glock 23's and 32C's are based upon the TM Glock 26, however they have the longer frames, plus longer slide and barrel assemblies. Aftermarket parts might be a tough find in terms of slides and barrels, Mitchell12.

[Airmax]

I have to disagree. I'm using parts for the TM G17 to repair my KJW G32c which do work and not the G26 Advance. The KJW G23/32 are much closer to TM G17 than G26. I've looked into it and asked about this issue before, they point toward the Tm G17 model for parts. You can try the other model for parts base but not sure your going to get the same results.

cheers

[Mitchell12]

AGH! So let me just clear things up...Airmax, Have you ever used a tm G17 slide and barrel on a KJW 32?

[juicy]

Originally Posted by Airmax

I have to disagree. I'm using parts for the TM G17 to repair my KJW G32c which do work and not the G26 Advance. The KJW G23/32 are much closer to TM G17 than G26. I've looked into it and asked about this issue before, they point toward the Tm G17 model for parts. You can try the other model for parts base but not sure your going to get the same results.

cheers

Hmm interesting. I stand corrected, then.

[Airmax]

LOL
Like an good debate.
No, to the slide and Yes! to the barrel. I already have an good metal slide so getting one wasn't important and I have an tight bore Barrel for the TM G17 installed in my G32c

hope this helps
cheers

***Edited***
Just to support my statement regarding the TM G17 vs KJW G32C, I have used this part to replace my Knocker valve which broke:
http://www.airsoftparts.ca/store2/in...roducts_id=923

works like an charm

[Mitchell12]

Alright, I think I'll just replace the barrel as well since there is no real problems with the slide. Do you think a G17 slide WOULD work though?