ICS not firing.

Ghillie973 · February 17th, 2006, 23:17

Well I know that the sleeve is to tight as the bucking (which looks like a little bead right?) is all the way up in the hop-up unit so the hop-up is off. When I take the barrel out of the hop-up unit and keep the sleeve on I have to pop the BB past the beginning of the sleeve, after that the BB just rolls down the barrel.

So your thinking the sleeve is too tight? Would it have shrunk? Everything was working fine until one day it just started to jam up. I'll try to look around for another sleeve first. I'm just kinda in a rush cause the Stargate game is in two weeks and this is my only AEG.

Thanks for the help.

stokes · February 17th, 2006, 23:20

Np man anytime to help a fellow airsofter/friend. Your best bet is to get the gaurder one. I had the exact same problem when i tried to use the stock ICS hopup sleeve on my systema tightbore. So when i changed it to a gaurder sleeve all was well... its kinda weird i might add but it worked in the end.

walks · February 18th, 2006, 03:11

could be part of a broken BB, I've had this happen befor try taking out the hopup/barrel assembaly and get a good look in there, might be a little chunk of something

Mysteryfish · February 18th, 2006, 04:11

What kind of material is the hop-up sleeve made of, and have you gotten it lubed up at any point?

I hear silicone oil can cause hop-up rubbers to swell...

I'm sure someone has probably already mentioned it, or it's a non-issue because you haven't done anything to it... but it's worth mentioning.

666 · February 18th, 2006, 04:58

They do swell, big time, buckings do the same thing, but he would've noticed it buy now because it's next to impossible to put hopup sleeve back in place if it "got fatter" from silicon.

Ghillie973 · February 23rd, 2006, 20:58

Just put a Guarder Hop-up sleeve in and it fixed the problem.

What causes the sleeve to shrink? Is it to much silicon oil or does it just happen over time? I guess it's a good idea to always have an extra sleeve with you.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

February 18th, 2006, 03:11	#33
walks Trader rating Join Date: Sep 2004 Location: Cambridge On	could be part of a broken BB, I've had this happen befor try taking out the hopup/barrel assembaly and get a good look in there, might be a little chunk of something __________________

February 18th, 2006, 04:58	#35
666 Trader rating Join Date: Jul 2004 Location: Toronto, Ontario	They do swell, big time, buckings do the same thing, but he would've noticed it buy now because it's next to impossible to put hopup sleeve back in place if it "got fatter" from silicon. __________________ Op Woodsman. Biggest WW2 event in Ontario.

February 17th, 2006, 23:17	#31
Ghillie973 Trader rating Join Date: Nov 2004 Location: Petawawa	Well I know that the sleeve is to tight as the bucking (which looks like a little bead right?) is all the way up in the hop-up unit so the hop-up is off. When I take the barrel out of the hop-up unit and keep the sleeve on I have to pop the BB past the beginning of the sleeve, after that the BB just rolls down the barrel. So your thinking the sleeve is too tight? Would it have shrunk? Everything was working fine until one day it just started to jam up. I'll try to look around for another sleeve first. I'm just kinda in a rush cause the Stargate game is in two weeks and this is my only AEG. Thanks for the help.

February 17th, 2006, 23:20	#32
stokes Trader rating Join Date: Dec 2005 Location: Toronto	Np man anytime to help a fellow airsofter/friend. Your best bet is to get the gaurder one. I had the exact same problem when i tried to use the stock ICS hopup sleeve on my systema tightbore. So when i changed it to a gaurder sleeve all was well... its kinda weird i might add but it worked in the end.

February 18th, 2006, 04:11	#34
Mysteryfish Trader rating Join Date: Mar 2004 Location: North Vancouver, B.C.	What kind of material is the hop-up sleeve made of, and have you gotten it lubed up at any point? I hear silicone oil can cause hop-up rubbers to swell... I'm sure someone has probably already mentioned it, or it's a non-issue because you haven't done anything to it... but it's worth mentioning.

February 23rd, 2006, 20:58	#36
Ghillie973 Trader rating Join Date: Nov 2004 Location: Petawawa	Just put a Guarder Hop-up sleeve in and it fixed the problem. What causes the sleeve to shrink? Is it to much silicon oil or does it just happen over time? I guess it's a good idea to always have an extra sleeve with you.

ICS not firing.

Doctor's Corner