Airleak or Spring lemon?

[13Fido13]

Is the spring correct. With the most coils at the spring guide side? I never saw a true answer to that question. You only said the original spring was linear.

[Boyso]

Yes, I meant, on the S90 that is non-linear, tighter coils are near spring guide. When I put the stock spring, it's linear so it doesn't matter.

But, I think I found the leak. Sometimes, the sort of spacer holding the hopup on the tightbore seems to be leaking a bit. I'll add teflon tape and retry.

I also put tape blocking the window in the hopup, where the tracer unit would go. I don't have one, so I'm just blocking it, just in case it could help somehow.

[Boyso]

Alright guys, I don't know really what I did, but now, it's working awesomly, with the S90 and .25s.

One thing I noticed, some kind of dust or like small smoke was coming out of the barrel for the first 5 shots, but I guess it was just dirt or sand in the barrel.

Thank you very much for the help!

[Gunny_McSmith]

Originally Posted by LastSpartan

Alright guys, I don't know really what I did, but now, it's working awesomly, with the S90 and .25s.

One thing I noticed, some kind of dust or like small smoke was coming out of the barrel for the first 5 shots, but I guess it was just dirt or sand in the barrel.

Thank you very much for the help!

ya dust, or oil or grease....

IMO you fixed the leak by teflon taping the hopup rubber and barrel right?

[Boyso]

Yes, but I'm not sure if it was really leaking that much from there. Maybe it was just not properly seated with the gearbox.

Anyway, it works !

[Gunny_McSmith]

haha content que ça ait marché... :P

....derien... XD