Ok I must have screwed up

[caker_chris]

So I have an ics m4 sir and i took the gun apart to measure my inner barrel. As i was doing this i pulled the charging handle out and in doing that something happened to the spring. The charging handle will not spring back into place and when i try to put the inner barrel back in and then the cylinder the spring just bends and bunches up making it impossible to put the gun back together.

Anyone know what i did wrong and how can i fix it?

[Shirley]

You stretched the spring. You need a new spring.

[Amos]

www.airsoftparts.ca

You can buy a new charging handle spring!

It happens lol.

[caker_chris]

damn those springs stretch awfully easy. thanks for the answers.

the gun will still work perfectly fine with out the charging handle though right?

[Twin#1[Op-for]]

Yep, you might need to pull the door that exposes the hop-up by hand though.

[theguy]

Thread jack.

I accidentally pulled my changing handle too hand last night >.>

Anyways, I have a replacement spring, but the piece of black plastic that goes between the charging handle and the body, the part that interacts with the fake bolt.

Any ideas where to find a replacement?

[caker_chris]

thats no big deal, as long as the gun works. Now i just have to find myself a spring.

[theguy]

in addition to what amos linked

http://www.airsoftparts.ca/store2/in...oducts_id=1033

[caker_chris]

Originally Posted by theguy

in addition to what amos linked

http://www.airsoftparts.ca/store2/in...oducts_id=1033

will that spring work for all guns?

[o2slick]

it works for m4 and m16

[caker_chris]

ok good stuff, so i just need to figure out how to replace it