help me out Complete drop-in gearbox ..

[mc_solo]

okay i ordered a Front wired for M4A1/M16A2 (full cylinder)
Complete drop-in gearbox with reinforced shell, 8mm bearings, M120 spring and fully upgraded G&P internals. Approx. 380-400 fps.
Pre-wired with mini connectorFuse/Fuse holder set is included.
for my g&g m4 and im uesing stock motor. i got it all put back getter and was reddy to fire. and i blow a fuse. so i changed that out. and tryed a one more time it blew. sp i hard wired it and nothing. i pull the motor and kept it wired to the gear box and and pulled the trigger and the motor spone.

what the FUCK is WRONG whit THIS thing?????

[Sha Do]

PM inbound.

SHA DO

[Styrak]

Your battery isn't powerful enough.
Use a bigger battery.

[Azathoth]

Take the motor out of the pistol grip, plug the connector terminals to the motor, pull the trigger. Does your motor spin freely?

Either

1. The motor terminals are marked in reverse on the motor or
2. The battery does not have the power to pull your spring.

[mc_solo]

i did ann that bro.. the motor spins and all that.. but i soon as i put that motor back in that gun.. i the motor dont work and it blows the fuse..

Originally Posted by Azathoth

Take the motor out of the pistol grip, plug the connector terminals to the motor, pull the trigger. Does your motor spin freely?

Either

1. The motor terminals are marked in reverse on the motor or
2. The battery does not have the power to pull your spring.

[damage]

motor height

[Styrak]

Originally Posted by mc_solo

i did ann that bro.. the motor spins and all that.. but i soon as i put that motor back in that gun.. i the motor dont work and it blows the fuse..

Did you read my post at all?

Any motor will work outside the gun with no load on it.

[marcwhite]

You could try replacing the motor connectors? I was having similar problems until I replaced mine.

[Blackthorne]

What voltage is your battery? You need a good 9.6 to run that spring.

I also assume "stoke" motor means STOCK motor. What brand? You can pour all the voltage you want into a crap motor and all you will get is heat.

[mc_solo]

Originally Posted by Blackthorne

What voltage is your battery? You need a good 9.6 to run that spring.

I also assume "stoke" motor means STOCK motor. What brand? You can pour all the voltage you want into a crap motor and all you will get is heat.

it a stock G&G MOTOR..

[lemegacool]

you got some great info up there !

so to resume... try:

a bigger battery!

unscrewing the screw at the bottom of the grip

then check that the motor connectors aren't broken...

if none of these works... take it to a gundoc...or try a known "good" motor... personally i dont trust g&g stuff...

[Azathoth]

I forgot to ask does your gun make a slightly *click* sound when you pul the trigger. the electrical terminals on the motor could be reverse.

[SHÖCK]

Originally Posted by Azathoth

I forgot to ask does your gun make a slightly *click* sound when you pul the trigger. the electrical terminals on the motor could be reverse.

The slight click sound could either be from the motor trying to run backwards (good thing the anti-reversal latch is there) if your polarities are reversed.

Or like everybody else is saying, your battery is too weak and the click is the motor trying in vain to turn over and failing. A easy test is to get a large battery and try that.

[Skladfin]

motor height.... it's too far up in the gearbox. This one's pretty obvious.

[mc_solo]

Banana