|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
April 12th, 2010, 22:27
|
#1 |
|
problems with m4 gearbox
ok. so in short my problem seems to be that the motor is not turning the gears. the motors i have tested both are turning properly but when they are connected to the gearbox it seems as though the motor is being locked up. i can hear it trying to turn but it just wont. the spring in the mechbox was tested at about 350 fps previously so i dont think it is too heavy to be turned. any common problems this could result from? any solutions?
__________________
Loves me some CQB |
|
|
|
|
April 13th, 2010, 00:13
|
#2 |
|
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
-shimming too tight
-motor set too high -piston not installed properly -underpowered or uncharged battery |
|
|
|
|
April 20th, 2010, 00:17
|
#3 |
|
motor not turning
try charging your battery yes it will run w/out load, with load not enough power maybe just charge your battery and test it again.
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
