G19 emptying the gas

BrokenBird · September 15th, 2009, 18:21

Ok, so I bought this gun from the classified and it was a complete lemon, I changed the slide, the front spring the inner barrel and got two brand new magazines.

But I still have an issue, when shooting, something get stuck an totally empties my magazine's gas, what should I do next?

BrokenBird · September 15th, 2009, 20:15

I completly disasembled the gun and its trigger assembly, all the parts seems ok, I cleaned it all and put it back together (that was actually a lot of fun doing this). I will try it tomorrow to see if it is better.

On a positive note, I think those guns are amazing the way they are built, this is the first time I take one apart totally and put it back together, and I was truelly impressed by the internals, except for the spring #82 who was a bitch to get back on (until I realized the gun was cocked and had too much pressure).

CDN_Stalker · September 15th, 2009, 21:21

Look at the split where the hammer is, inside is the valve striker, put some oil right on that area, and cock/release the hammer against your thumb a couple dozen times to work it in............. then see if it does tht same. 80% of the time this problem is a lube issue, yours might be different (my G19 is doing the same, only at games when I need it, at home it fires fine, is way more than just a lube issue.

BrokenBird · September 16th, 2009, 14:58

Ok we are actually moving forward with this. The gas does not empty anymore. The last problem:

When I cock the gun manually without a magazine, it works flawlessly, however when a magazine is present, most of the time it hammer won't lock in place, which means I can fire once, then have to cock manually a few times until it catches. Any ideas?

CDN_Stalker · September 16th, 2009, 15:15

One of my G19s does the same thing, and I still can't figure it out. Add in my lack of time to work on both my 19s........

BrokenBird · September 17th, 2009, 14:11

Anyone, please?

BrokenBird · September 18th, 2009, 20:14

Played with it a little more, and found a little piece of metal who was floating around. I dismantled it again, and found that part 78 was broken. Thankfully airsoftparts.ca had it in stock! Hope this is the last part I have to change on this gun.

CDN_Stalker · September 18th, 2009, 20:42

Ironically, parts #78 and #87 (see the irony, same numbers, reversed) are the usual ones to go in KSC Glocks.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

September 15th, 2009, 18:21	#1
BrokenBird pɹıq spɹɐʍʞɔɐq Trader rating Join Date: Jul 2009 Location: Repentigny	G19 emptying the gas Ok, so I bought this gun from the classified and it was a complete lemon, I changed the slide, the front spring the inner barrel and got two brand new magazines. But I still have an issue, when shooting, something get stuck an totally empties my magazine's gas, what should I do next?

September 15th, 2009, 21:21	#3
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	Look at the split where the hammer is, inside is the valve striker, put some oil right on that area, and cock/release the hammer against your thumb a couple dozen times to work it in............. then see if it does tht same. 80% of the time this problem is a lube issue, yours might be different (my G19 is doing the same, only at games when I need it, at home it fires fine, is way more than just a lube issue. __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

September 16th, 2009, 15:15	#5
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	One of my G19s does the same thing, and I still can't figure it out. Add in my lack of time to work on both my 19s........ __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

September 15th, 2009, 20:15	#2
BrokenBird pɹıq spɹɐʍʞɔɐq Trader rating Join Date: Jul 2009 Location: Repentigny	I completly disasembled the gun and its trigger assembly, all the parts seems ok, I cleaned it all and put it back together (that was actually a lot of fun doing this). I will try it tomorrow to see if it is better. On a positive note, I think those guns are amazing the way they are built, this is the first time I take one apart totally and put it back together, and I was truelly impressed by the internals, except for the spring #82 who was a bitch to get back on (until I realized the gun was cocked and had too much pressure).

September 16th, 2009, 14:58	#4
BrokenBird pɹıq spɹɐʍʞɔɐq Trader rating Join Date: Jul 2009 Location: Repentigny	Ok we are actually moving forward with this. The gas does not empty anymore. The last problem: When I cock the gun manually without a magazine, it works flawlessly, however when a magazine is present, most of the time it hammer won't lock in place, which means I can fire once, then have to cock manually a few times until it catches. Any ideas?

September 17th, 2009, 14:11	#6
BrokenBird pɹıq spɹɐʍʞɔɐq Trader rating Join Date: Jul 2009 Location: Repentigny	Anyone, please?

September 18th, 2009, 20:14	#7
BrokenBird pɹıq spɹɐʍʞɔɐq Trader rating Join Date: Jul 2009 Location: Repentigny	Played with it a little more, and found a little piece of metal who was floating around. I dismantled it again, and found that part 78 was broken. Thankfully airsoftparts.ca had it in stock! Hope this is the last part I have to change on this gun.

September 18th, 2009, 20:42	#8
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	Ironically, parts #78 and #87 (see the irony, same numbers, reversed) are the usual ones to go in KSC Glocks. __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

G19 emptying the gas

Doctor's Corner