TM V3 trigger issues.

[Ktown Militia]

On the weekend during a last game my tm ak got stuck in full auto and now the trigger wont even budge when on semi- or full. I took apart the mechbox put it all back together again and narrowed it down to the selector plate or the actuall trigger assembly. I consider myself expert at dissmantelling and putting back together of the V3 gearboxes as I've been doing it for over 2 years. I just cant firgure if the issue like I said was indeed the selector plate or trigger assembly.

any info would help

[Skladfin]

there should be two copper contacts that touches the trigger side contact.

push them slightly farther apart from each other. enough so that the trigger side contact doesn't get stuck in between them, but still make a good amount of surface area for contact.

[Ktown Militia]

that side seems to be working fine, no binding contacts look fine.

[Ktown Militia]

Originally Posted by Skladfin

there should be two copper contacts that touches the trigger side contact.

push them slightly farther apart from each other. enough so that the trigger side contact doesn't get stuck in between them, but still make a good amount of surface area for contact.

Solved the problem this morning. Get this, there was a shim stuck in the trigger assembly block in between the two brass contacts!!! It was preventing the trigger block from moving into these two contacts!!

[Skladfin]

lol glad to hear it works again man.

[Ktown Militia]

Originally Posted by Skladfin

lol glad to hear it works again man.

hahaha, thanks dude.