ICS MP5A4 selector switich questions

[1shot1kill]

OK..before anyone gets trigger happy with the flames...I already di a search and couldn't find what I was looking for.

Now...I have a ICS MP5A4 that i'm trying to sell (but with-out any luck), so Ive decided if it dosen't sell i'm going to rip it down and re build it into a crazy MP5. The questions i have are in regards to the selector switch. The switch is very loose and hardly clicks (but works fine). How can I tighten up the switch so that its nice and stiff like it was when new?

2nd...While i'm here... My MP5A4 already has a metal body form ICS. But if i'm going to keep this gun as a collector peice, are there any other "metal" bodies better and more detailed with all the trademarks then the ICS? Also is there any metal solid stocks available for the MP5?

I appreciate the responses.

Thanks

[porry]

a metal solid stock would just add uneeded weight and stress on the body. And the real mp5 doesnt have a metal stock anyways, its all that fibre. i dont think the body is even metal. And, im not too sure if any other body would fit the ICS gearbox.

From what ive seen H&K seems to lean towars more of those plastic (cant think of the correct name) parts. The g36's, ump .45's, and i believe the mp5 series bodies and stocks are mostly that plastic stuff, but i could be mistaken

[666]

1shot1kill, get a real steel stock. I used to have one on my MP5. Custom made battery can be fit inside of it.

[1shot1kill]

Originally Posted by 666

1shot1kill, get a real steel stock. I used to have one on my MP5. Custom made battery can be fit inside of it.

Do you have any pictures of it or where I can get one?

[1shot1kill]

Does anyone know how I can fix the selector switch so its now loose?

[concept_8]

If it's not the screw that holds the seperate switch onto the axle/shaft of the main selector piece than I'd say you'll need a new selector plate.
shouldn't be that costly or hard to swap if you know how to take the gun apart.
good luck.

[1shot1kill]

Originally Posted by concept_8

If it's not the screw that holds the seperate switch onto the axle/shaft of the main selector piece than I'd say you'll need a new selector plate.
shouldn't be that costly or hard to swap if you know how to take the gun apart.
good luck.

You mean this....If I replace this part then my switch will be normal again? Not loose. :???:

[firemachine69]

Yup.