STAR M4A1 Hop-Up

HaloSix4 · September 12th, 2009, 15:35

So now that I will be keeping my STAR M4 I need to take care of the problems that came with it, the Biggest problem to me at least is that the BBss fly 30feet over the target with hop up turned off, I have taken the Hop-Up out and cleaned the barrel and the BBs still do the same. Any Ideas what can be causing this.

Thanks

The Saint · September 12th, 2009, 16:07

Have you tried 0.28g BBs? It's all I shoot from mine. Even 0.25g is too light, and 0.20g is just impossible.

HaloSix4 · September 12th, 2009, 16:11

I've tried .30g BBs they want to do the same thing just not as bad, The only thing I can think of being the problem is the 2 piece Hop-Up bucking, the on part has a small rip in it, that I just noticed now.

HaloSix4 · September 12th, 2009, 17:05

I put in a Lower power spring and I'm getting the same problem.

The Saint · September 12th, 2009, 17:11

Spring power won't fix it. Try a set of H-nubs. The white has a tendency to under hop on most settings, but the black works pretty good.

http://www.airsoftparts.ca/store2/in...roducts_id=720

HaloSix4 · September 12th, 2009, 17:22

I have a Gurader Nub that wont fit the hopup, every time I fire with it in it just pops into the small hole ware the Figure 8 looking nub would slide into.

The Saint · September 12th, 2009, 17:27

I also have the Guarder clear hopup sleeve set, but I never use the clear nub. I've gotten the purple nub from a Prometheus set to work just fine, though.

HaloSix4 · September 12th, 2009, 17:37

ok I'll try it and see what happends

HaloSix4 · September 12th, 2009, 18:59

Quote:

Originally Posted by The Saint

I also have the Guarder clear hopup sleeve set, but I never use the clear nub. I've gotten the purple nub from a Prometheus set to work just fine, though.

Did your BB's Fly up when the Hop-Up was off as well? With 0.20G.

The Saint · September 12th, 2009, 19:45

Yes.

HaloSix4 · September 12th, 2009, 19:49

Ah, ok well I'll try some .25's or .28's because I already have a whole new ARES Hop-up Unit on the way.

Daiviet · September 12th, 2009, 19:49

One thing I noticed with star's hop-up design, is when you think you've set it off, its actually fully on. You had to turn it all the way, then turn it back just slightly, then the hop-up will be completely off.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

September 12th, 2009, 15:35	#1
HaloSix4 aka Halo64 Trader rating Join Date: Jul 2007 Location: Omemee, ON	STAR M4A1 Hop-Up So now that I will be keeping my STAR M4 I need to take care of the problems that came with it, the Biggest problem to me at least is that the BBss fly 30feet over the target with hop up turned off, I have taken the Hop-Up out and cleaned the barrel and the BBs still do the same. Any Ideas what can be causing this. Thanks

September 12th, 2009, 16:07	#2
The Saint Trader rating Join Date: Jan 2005 Location: Quebec	Have you tried 0.28g BBs? It's all I shoot from mine. Even 0.25g is too light, and 0.20g is just impossible. __________________ "The Bird of Hermes is My Name, Eating My Wings to Make Me Tame."

September 12th, 2009, 17:11	#5
The Saint Trader rating Join Date: Jan 2005 Location: Quebec	Spring power won't fix it. Try a set of H-nubs. The white has a tendency to under hop on most settings, but the black works pretty good. http://www.airsoftparts.ca/store2/in...roducts_id=720 __________________ "The Bird of Hermes is My Name, Eating My Wings to Make Me Tame."

September 12th, 2009, 16:11	#3
HaloSix4 aka Halo64 Trader rating Join Date: Jul 2007 Location: Omemee, ON	I've tried .30g BBs they want to do the same thing just not as bad, The only thing I can think of being the problem is the 2 piece Hop-Up bucking, the on part has a small rip in it, that I just noticed now.

September 12th, 2009, 17:05	#4
HaloSix4 aka Halo64 Trader rating Join Date: Jul 2007 Location: Omemee, ON	I put in a Lower power spring and I'm getting the same problem.

September 12th, 2009, 17:22	#6
HaloSix4 aka Halo64 Trader rating Join Date: Jul 2007 Location: Omemee, ON	I have a Gurader Nub that wont fit the hopup, every time I fire with it in it just pops into the small hole ware the Figure 8 looking nub would slide into.

September 12th, 2009, 17:27	#7
The Saint Trader rating Join Date: Jan 2005 Location: Quebec	I also have the Guarder clear hopup sleeve set, but I never use the clear nub. I've gotten the purple nub from a Prometheus set to work just fine, though. __________________ "The Bird of Hermes is My Name, Eating My Wings to Make Me Tame."

September 12th, 2009, 17:37	#8
HaloSix4 aka Halo64 Trader rating Join Date: Jul 2007 Location: Omemee, ON	ok I'll try it and see what happends

September 12th, 2009, 19:45	#10
The Saint Trader rating Join Date: Jan 2005 Location: Quebec	Yes. __________________ "The Bird of Hermes is My Name, Eating My Wings to Make Me Tame."

September 12th, 2009, 19:49	#11
HaloSix4 aka Halo64 Trader rating Join Date: Jul 2007 Location: Omemee, ON	Ah, ok well I'll try some .25's or .28's because I already have a whole new ARES Hop-up Unit on the way.

September 12th, 2009, 19:49	#12
Daiviet Captain Sunshine Trader rating Join Date: Aug 2006	One thing I noticed with star's hop-up design, is when you think you've set it off, its actually fully on. You had to turn it all the way, then turn it back just slightly, then the hop-up will be completely off.

STAR M4A1 Hop-Up

Doctor's Corner