93R Mag

[Muxlow]

Iv got me a Beretta 93R with a extended mag..
How do i take it apart to repair some orings and such. Its a GBB.
It use to hold a charge but now it leaks when i go to fill it
I only see 2 what look like push pins on the bottom but not sure. Never taken one apart before

[CDN_Stalker]

Need a punch and an hammer to knock those pins out, then you can remove the base of the mag. Use automotive blue gasket maker ($5 at Canadian Tire), and put a good amount on the large square gasket at the bottom, then press the bottom into the mag body, reseat the pins and let sit 24hrs before putting any gas in.

[Muxlow]

Can doooo

[Crunchmeister]

Originally Posted by CDN_Stalker

Need a punch and an hammer to knock those pins out, then you can remove the base of the mag. Use automotive blue gasket maker ($5 at Canadian Tire), and put a good amount on the large square gasket at the bottom, then press the bottom into the mag body, reseat the pins and let sit 24hrs before putting any gas in.

I'm having a problem with one of my KJW mags and it seems to be leaking around its base too. I've had it opened up a couple of times to attempt to repair it and I was considering using automotive gasket maker to seal it up. Thanks for confirming it!