Help locating a part.

[CanadianJoker]

Hi guys,
I need some help locating a trigger sear for my marui hi-capa (5.1 gov)
Illusion gave me a couple places to look, but no luck. I've been on redwolf/uncompany/wgc/den/airsoftextreme/ and jungletoys, and can not seem to find a replacement part. (yes I also looked on here.)
if any one knows where or how I can find a new sear it would be great.
Thanks all

[ILLusion]

Den Trinity Shop:

http://www.dentrinityshop.com/pr_details.jsp?pid=7375

[CanadianJoker]

hmm no wonder i cant find it im looking for the wrong part.. ok heres what i need



this what i need but it's for the wrong pistol. (look simmalar to this)
that is for a wa hi-capa and i need the tm version. the tm version is a 3 prong leaf type spring that is under this part.



and goes up to the hammer assembly.
not sure what else to say to describe the part, and since i dont have a manual i cant just look for a parts number......
thx for any help.

[Jugglez]

You're looking for part #69 in the Hi-capa 5.1 manual..

Good luck on your search :tup:

[CanadianJoker]

thank you jugglez and illusion... time to look once again. weee

[ILLusion]

Josh,

You might want to check something to see if you really do need a new leaf spring or not.

I recently installed a new mid-frame on my hi-capa and after doing so, the hammer wasn't locking back. This happened on TWO of these frames, but worked fine on my hi-capa.

My presumption was that the sear wasn't connecting - and most likely was caught on something and not moving.

My presumption was correct - I took out the main spring housing and lifted the beavertail safety to see what the issue was. It looks like the top leaf spring that connects with the sear was caught on a moulding line/lip/flash on the sear. Once I filed that lip down, the hammer worked perfectly.