M4/M16 Thread

Delark · July 28th, 2015, 20:16

WE Katana

- BTC Spectre mosfet
- Siegetek Gears
- WE Red cylinder with Marksman nozzle
- Prowin Hopup Unit
- Namazu Flat hop nub with roller bar
- Shaved Prometheus rubber
- Prometheus Precision barrel
- Retro Arms Speed trigger

This is the fastest build I've ever done. Even the wind can pull the trigger on this one.

Still searching for a good setup, this picture's from a while back, I'm now running it with an Acog and a amplifier. Will try to post pictures of that soon.

EOD Steve · July 29th, 2015, 10:12

When you have to kill absolutely everybody in the room.

pestobanana · July 29th, 2015, 10:18

Quote:

Originally Posted by EOD Steve

This weekend. If I don't make it out alive, tell my family I love them.

The less messy version of my queue... I still have 8 Spectre builds to do and 2 Chimera builds to do. I don't even remember how's my I've already done in the past month since they've been released.

BobbyDangerous · July 29th, 2015, 10:51

Quote:

Originally Posted by Delark

WE Katana

- BTC Spectre mosfet
- Siegetek Gears
- WE Red cylinder with Marksman nozzle
- Prowin Hopup Unit
- Namazu Flat hop nub with roller bar
- Shaved Prometheus rubber
- Prometheus Precision barrel
- Retro Arms Speed trigger

This is the fastest build I've ever done. Even the wind can pull the trigger on this one.

Still searching for a good setup, this picture's from a while back, I'm now running it with an Acog and a amplifier. Will try to post pictures of that soon.

Dirty

EOD Steve · July 29th, 2015, 16:42

Quote:

Originally Posted by Delark

WE Katana

- BTC Spectre mosfet
- Siegetek Gears
- WE Red cylinder with Marksman nozzle
- Prowin Hopup Unit
- Namazu Flat hop nub with roller bar
- Shaved Prometheus rubber
- Prometheus Precision barrel
- Retro Arms Speed trigger

This is the fastest build I've ever done. Even the wind can pull the trigger on this one.

Still searching for a good setup, this picture's from a while back, I'm now running it with an Acog and a amplifier. Will try to post pictures of that soon.

I really like this build.

Red Dot · July 29th, 2015, 17:46

All this BTC goodness, my heart can't take much more...

BioRage · July 29th, 2015, 17:51

Quote:

Originally Posted by Delark

WE Katana

- BTC Spectre mosfet
- Siegetek Gears
- WE Red cylinder with Marksman nozzle
- Prowin Hopup Unit
- Namazu Flat hop nub with roller bar
- Shaved Prometheus rubber
- Prometheus Precision barrel
- Retro Arms Speed trigger

This is the fastest build I've ever done. Even the wind can pull the trigger on this one.

Still searching for a good setup, this picture's from a while back, I'm now running it with an Acog and a amplifier. Will try to post pictures of that soon.

I really like this build too, looks sexy.

Quote:

Originally Posted by EOD Steve

When you have to kill absolutely everybody in the room.

Second row, second one, I like that a lot.

Zack The Ripper · July 30th, 2015, 10:22

Quote:

Originally Posted by Delark

WE Katana

- BTC Spectre mosfet
- Siegetek Gears
- WE Red cylinder with Marksman nozzle
- Prowin Hopup Unit
- Namazu Flat hop nub with roller bar
- Shaved Prometheus rubber
- Prometheus Precision barrel
- Retro Arms Speed trigger

This is the fastest build I've ever done. Even the wind can pull the trigger on this one.

Still searching for a good setup, this picture's from a while back, I'm now running it with an Acog and a amplifier. Will try to post pictures of that soon.

I request video.

EOD Steve · August 9th, 2015, 19:21

Real G's move in silence like lasagna.

warplane95 · August 16th, 2015, 22:32

BobbyDangerous · August 30th, 2015, 04:08

Posted this in the GBBR thread

EOD Steve · August 30th, 2015, 17:45

Picked up an RS Geissele again...

BobbyDangerous · August 30th, 2015, 21:20

Quote:

Originally Posted by EOD Steve

Picked up an RS Geissele again...

Looks Good

ARC-74 · August 30th, 2015, 22:32

Got the last few bits for my early M16A1, tear drop forward assist, three prong flash hider and A1 stock. The G&P stock needed a little cleaning up (sanding) to get rid of some sink marks from the mould/casting process. When that was done I refinished it (along with the handguards) with some matt black Dupli-color vinyl coating. adheres well to the abs plastic, but ends up more of a satin sheen then matt. Early furniture was glossier, so that works for me.

(Same old floor, but the rifle has new old parts .)

_Whiskey_ · August 31st, 2015, 09:15

Quote:

Originally Posted by ARC-74

No one yet?......uh hem, That's what she said

Moving along, my retro make over got a little more retro..er. G&P A1 front set and A1 grip. (the black G&P slip ring was swapped for a real one that I had)
Still sporting an A2 stock & forward assist, but eventually that will be sorted out sometime.
(Shown with my WE 16 inch carbine )

I used graphite powder and a light coat of clear in an attempt to get the aluminum barrel and front sight to match the parkerized steel flash hider.

Damm you and your Sexy m16's

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

July 29th, 2015, 10:12	#1397
EOD Steve Trader rating Join Date: Jun 2012	When you have to kill absolutely everybody in the room. __________________ The Steve has spoken. Last edited by EOD Steve; July 29th, 2015 at 10:47..

August 9th, 2015, 19:21	#1404
EOD Steve Trader rating Join Date: Jun 2012	Real G's move in silence like lasagna. __________________ The Steve has spoken.

August 16th, 2015, 22:32	#1405
warplane95 Trader rating Join Date: Jul 2009 Location: Moncton	__________________ Be gentle I'm French, If you don't undersetand what I say, just say it.

July 28th, 2015, 20:16	#1396
Delark Trader rating Join Date: May 2012	WE Katana - BTC Spectre mosfet - Siegetek Gears - WE Red cylinder with Marksman nozzle - Prowin Hopup Unit - Namazu Flat hop nub with roller bar - Shaved Prometheus rubber - Prometheus Precision barrel - Retro Arms Speed trigger This is the fastest build I've ever done. Even the wind can pull the trigger on this one. Still searching for a good setup, this picture's from a while back, I'm now running it with an Acog and a amplifier. Will try to post pictures of that soon.

July 29th, 2015, 17:46	#1401
Red Dot Google level: BOSS Trader rating Join Date: Dec 2013 Location: Stouffville, Ontario	All this BTC goodness, my heart can't take much more...

August 30th, 2015, 04:08	#1406
BobbyDangerous Trader rating Join Date: Mar 2010 Location: Oshawa	Posted this in the GBBR thread __________________ -Dangerous- BA Level 3 Certified

August 30th, 2015, 17:45	#1407
EOD Steve Trader rating Join Date: Jun 2012	Picked up an RS Geissele again... __________________ The Steve has spoken.

August 30th, 2015, 22:32	#1409
ARC-74 Can't Aim worth a damn!! old lady gives me heck for missing the toilet all the time. Trader rating Join Date: Apr 2011 Location: Montreal area & Tatooine	Got the last few bits for my early M16A1, tear drop forward assist, three prong flash hider and A1 stock. The G&P stock needed a little cleaning up (sanding) to get rid of some sink marks from the mould/casting process. When that was done I refinished it (along with the handguards) with some matt black Dupli-color vinyl coating. adheres well to the abs plastic, but ends up more of a satin sheen then matt. Early furniture was glossier, so that works for me. (Same old floor, but the rifle has new old parts .) __________________ Insert name here:

M4/M16 Thread

Airsoft Media