This is SAW thread

[m102404]

The smaller "nut sack" box mags will work. They're easier on the support arm too since you don't have to hook your arm out and around the box mag (at least I found it so).

They're kind of tough to fill through their little port...but you can actually take the whole bottom box off the mag to fill it and then put it back in the case and zip it up. I found that they feed a bit better too. Pressure switch vs. sound activated...so the downside is that you need to put the pressure button somewhere (I put it under my stong hand thumb).

Re. the green box...the wiring is pretty lousy in the A&K box mags. There's not much that can be done re. how the side cover snaps on/off. I had the same issue of BBs getting down into the feeding mech....but I switched over to a nut-sack box mag.

[JTF27]

My A&K M249 MK1, shortened the barrel an added a Tromex Shark flashhider. Also customized the box.

[Wantabe_Warrior]

Is there a 'duck bill' flash hider make for airsoft, or do people use the Rebar cutter in it's place?

here's some examples of the the 'duck bill':
http://www.imfdb.org/w/images/f/f3/TOTS_M60E4-3.jpg
http://www.imfdb.org/w/images/1/14/TOTS_M60E4-4.jpg (check the background)

[ThunderCactus]

Yeah, some M60s have them

[Ninja_En_Short]

If you buy an MK43 you'll have one. M60E4 usually have a bird cage one.

[sushicake]

Hey anyone know does the G&P M249 stock fit on A&K's? or do I sense dremeling in my future?

[R.I.T.Z]

Originally Posted by sushicake

Hey anyone know does the G&P M249 stock fit on A&K's? or do I sense dremeling in my future?

depends on the stock. some minor modification may be necessary, though i have seen the collapsible G&P stock put onto a A&K para no problem

[sushicake]

Originally Posted by R.I.T.Z

depends on the stock. some minor modification may be necessary, though i have seen the collapsible G&P stock put onto a A&K para no problem

Well too late now I already ordered it let's see where it takes me.

[MilanWG]

Daytona Gas ECHO1 M249 Para

- Daytona Gas M249 kit
- Plmer-Pursuit Airsoft Female Stabilizer Remote Hose Kit - 8mm 0-700 PSI Aschcroft
- X2 20oz C02 tanks (need to be filled)

- G&P M249 RAS
- X2 BlueForceGear Universal Wire Loops - 3.25 Inch
- Mad Bull FNC style flash hider - CCW

[Conker]

Yey, some GBBR SAW love

[Wantabe_Warrior]

Can the Daytona gun kit use high pressure air/nitrogen instead of CO2?

[ratnest]

i have mine on high pressure air, works fine

[wildcard]

Originally Posted by Wantabe_Warrior

Can the Daytona gun kit use high pressure air/nitrogen instead of CO2?

Yes you can use HPA, I'm running HPA on my AK and my 249 it's definitely a bit louder and snappier compared to CO2

[appslapp]

The team workhorse:
old TOP m249 with PGC v3 GB, 130ms....dirty, broken...never stops

[Shirley]

lol your rubber band over your barrel would melt if it was on a real one.