Grenade Launchers - Good, Bad or Stupid ?

coach · January 27th, 2009, 21:15

Quote:

Originally Posted by Drake

anyone ever try a piece of pool noodle as a projectile?

might work but with it's weight and shape, with no fins, it will just tumble in the air. plus it's a bit large to fit in most launchers.

grimreefer · January 27th, 2009, 22:52

Damnit....this thread is making me want an M203. I think I'd definitely have to go for an RIS version though so I could take it off when I get tired of lugging it around. I'm not weak but there is a lot to be said for weapon balance.

panzergrenadier · January 27th, 2009, 23:16

Quote:

Originally Posted by grimreefer

Damnit....this thread is making me want an M203. I think I'd definitely have to go for an RIS version though so I could take it off when I get tired of lugging it around. I'm not weak but there is a lot to be said for weapon balance.

You get used to the Balance of an M203 on your rifle...
Eventually your rifle will feel weird without it...

hymnforthewretched · January 27th, 2009, 23:22

Rail mounted suck, plus there not issued. yes there is a real one made by LMT but it is not issued.

Having a front heavy heavy weapon with 203 is normal and just like the real deal. no one in the real world is carrying a big nicad battery to balaance the weight.

Drake · January 27th, 2009, 23:48

Quote:

Originally Posted by grimreefer

Damnit....this thread is making me want an M203. I think I'd definitely have to go for an RIS version though so I could take it off when I get tired of lugging it around. I'm not weak but there is a lot to be said for weapon balance.

You can get a proper realistic mounted one, and just get a QD front latch. Takes like 5 seconds to mount or remove the M203.

Zekk05 · January 28th, 2009, 01:01

I just got an EGLM for my scar, and the weight of that plus the eotech and anpeq is similar to my old CA249. Balance.. meh. not that bad. what i find the worst is the angle my wrist has to twist to hold it, versus normally holding the rifle. killer.. ugh

cant wait to give it a go when the season starts. lookin for some new nades though. only have 1

Kuro_Neko · January 28th, 2009, 01:16

Quote:

Originally Posted by Drake

You can get a proper realistic mounted one, and just get a QD front latch. Takes like 5 seconds to mount or remove the M203.

The problem with that is then you have no lower handguard, unless you have a CASV or something similar with an easily reattached lower section.

Kuro_Neko

grimreefer · January 28th, 2009, 01:23

Hmm...I have a CASV handguard. It looks awesome, but I find it a bit flimsy. I'm hesitant to put a foregrip on it (or an m203 for that matter) because I know if I drop it or smack it on a tree or something it'll warp or destroy it.

So now I'm considering the barrel-mount. But how exactly does it mount to the barrel again? You have to remove the front sight?

hymnforthewretched · January 28th, 2009, 01:43

No bottom handguard?? most bottom handguards slip right back in... i dont see how that would be an issue. Whip off the 203, whip back on you lower hand guard.. done and done. might have taken a few seconds longer, but at least you have a more reliable barrel mount system, not to mention more realistic.

grimreefer · January 28th, 2009, 01:50

The front bracket looks easy enough but how does the rear mount to the barrel?

Kuro_Neko · January 28th, 2009, 02:01

Barrel mounts mount ahead of the front sight. Usually you have to at least loosen the front sight but only to get the lower half of the stock handguard off. You have to remove the flash hider initially to get the front latch on. If you have the QD latch like Drake suggested then you can remove the launcher without having to remove the front latch. So once it's on there it's easy to take on and off. Refer to the pic of my baby higher up in this thread, that'll give you a good idea of how it mounts.

Kuro_Neko

grimreefer · January 28th, 2009, 02:08

sooo...is the rear of the M203 secured by the delta ring?

Kuro_Neko · January 28th, 2009, 02:39

Quote:

Originally Posted by hymnforthewretched

No bottom handguard?? most bottom handguards slip right back in... i dont see how that would be an issue. Whip off the 203, whip back on you lower hand guard.. done and done. might have taken a few seconds longer, but at least you have a more reliable barrel mount system, not to mention more realistic.

I'm not sure what model you've worked with but my front handguard does not go on or off nearly that easily. First of all, you have to loosen the front sight to get the forward handguard cap loose, then you need to push down the slip ring (which, at least on my model, is really damn strong) then fit the lower handguard on, then fit the forward cap and tighten the front sight again. Without assistance (or the proper takedown tool) this takes a good ten or fifteen minutes. Even with assistance it's going to take a couple of minutes and wouldn't be something I'd want to do in the field.

Quote:

Originally Posted by grimreefer

The front bracket looks easy enough but how does the rear mount to the barrel?

There's a thick ring that fits over the barrel, then you slide the lips on the back of the launcher over the ring. There's also a notch that slots into the holes in the slip ring.

Kuro_Neko

Danke · January 28th, 2009, 03:22

What's wrong with carrying a stand-alone launcher like a M79, FN MK13, or th H&K flavor?

Kuro_Neko · January 28th, 2009, 03:26

Quote:

Originally Posted by Danke

What's wrong with carrying a stand-alone launcher like a M79, FN MK13, or th H&K flavor?

Nothing really. Except firing time increases quite a bit if you have to sling one weapon and draw another. Also, mounted grenade launchers are just sexy looking.

Kuro_Neko

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

January 27th, 2009, 22:52	#77
grimreefer Trader rating Join Date: May 2008 Location: Victoria, BC	Damnit....this thread is making me want an M203. I think I'd definitely have to go for an RIS version though so I could take it off when I get tired of lugging it around. I'm not weak but there is a lot to be said for weapon balance. __________________

January 28th, 2009, 01:01	#81
Zekk05 Trader rating Join Date: Dec 2005 Location: Winnipeg	I just got an EGLM for my scar, and the weight of that plus the eotech and anpeq is similar to my old CA249. Balance.. meh. not that bad. what i find the worst is the angle my wrist has to twist to hold it, versus normally holding the rifle. killer.. ugh cant wait to give it a go when the season starts. lookin for some new nades though. only have 1 __________________

January 28th, 2009, 01:23	#83
grimreefer Trader rating Join Date: May 2008 Location: Victoria, BC	Hmm...I have a CASV handguard. It looks awesome, but I find it a bit flimsy. I'm hesitant to put a foregrip on it (or an m203 for that matter) because I know if I drop it or smack it on a tree or something it'll warp or destroy it. So now I'm considering the barrel-mount. But how exactly does it mount to the barrel again? You have to remove the front sight? __________________

January 27th, 2009, 23:22	#79
hymnforthewretched Trader rating Join Date: Dec 2005 Location: Alberta	Rail mounted suck, plus there not issued. yes there is a real one made by LMT but it is not issued. Having a front heavy heavy weapon with 203 is normal and just like the real deal. no one in the real world is carrying a big nicad battery to balaance the weight.

January 28th, 2009, 01:43	#84
hymnforthewretched Trader rating Join Date: Dec 2005 Location: Alberta	No bottom handguard?? most bottom handguards slip right back in... i dont see how that would be an issue. Whip off the 203, whip back on you lower hand guard.. done and done. might have taken a few seconds longer, but at least you have a more reliable barrel mount system, not to mention more realistic.

January 28th, 2009, 01:50	#85
grimreefer Trader rating Join Date: May 2008 Location: Victoria, BC	The front bracket looks easy enough but how does the rear mount to the barrel? __________________

January 28th, 2009, 02:01	#86
Kuro_Neko Trader rating Join Date: Aug 2008 Location: St. John's, Newfoundland	Barrel mounts mount ahead of the front sight. Usually you have to at least loosen the front sight but only to get the lower half of the stock handguard off. You have to remove the flash hider initially to get the front latch on. If you have the QD latch like Drake suggested then you can remove the launcher without having to remove the front latch. So once it's on there it's easy to take on and off. Refer to the pic of my baby higher up in this thread, that'll give you a good idea of how it mounts. Kuro_Neko

January 28th, 2009, 02:08	#87
grimreefer Trader rating Join Date: May 2008 Location: Victoria, BC	sooo...is the rear of the M203 secured by the delta ring? __________________

January 28th, 2009, 03:22	#89
Danke Prancercise Guru Trader rating Join Date: Oct 2007 Location: Danger Zone	What's wrong with carrying a stand-alone launcher like a M79, FN MK13, or th H&K flavor?

Grenade Launchers - Good, Bad or Stupid ?

Airsoft Guns Discussion