This is H&K thread

FlyGuy · June 2nd, 2011, 00:42

Apologies for the craptacular iPhone 4 photo (grain/noise/flash way too hot), but I was just tinkering around with some gear and had a thought...

What if, I were to take some of the (expensive) optics off my M4 and put them onto my MP7? CQB zombie killer perhaps??

Results:

Airsoft Items:

KSC (Taiwan ver) MP7 GBB SMG
HK "trades" el-cheap-o noise can (but it does have foam inside so it sort-of works)

Real Steel Items:

Insight ATPIAL AN/PEQ-15
Aimpoint T1 Micro
Surefire V2 Vampire IR/vis flashlight in a Daniel Defense offset mount
Magpul RSA

** Removed original iron sights because it somehow didn't look "right" with them on combined with the rest of the hardware, that and not quit enough room on the top rail to accomodate everything unless the irons were removed. Perhaps I'll fiddle around some more and see if I can make it work...or not and I'll just put the items back on my primary rifle.

'Fly

Short Round · June 2nd, 2011, 00:58

Thats sexy

Disco_Dante · June 2nd, 2011, 08:55

Looks pretty hot flyguy. I do love your real T1 so much.

MilanWG · June 2nd, 2011, 10:21

Nice Fly - all you need is the hk suppressor and your golden

manchovie · June 2nd, 2011, 13:48

rike-a sooo
http://www.wgcshop.com/wgc2008/main/...p7&catid=&cat=

FlyGuy · June 2nd, 2011, 18:22

Milan,

That's one HUGE can on the front of a relatively small gun! It must seriously make it front-heavy from a balance point of view?? Not liking it a whole lot but it appears that particular soldier does...seen some mud and dirt by the looks of it. AAC makes a much nicer one IMHO!

Manchovie,

NOT a fan of the VFC silencer. If you look closely at the text printed on it, there's a long-winded propaganda statement about the licensing of the trademarks etc. There's a better pic of it on RW, but the blah blah blah stencilled on it just turned me off.

The one I chose to put on my gun has nice HK trades (wrong caliber) but at least isn't ruined with useless Umarex propaganda! It was purchased from Airsoftparts.

'Fly

Shirley · June 3rd, 2011, 03:03

NSW mp7!
Add the can

Kable · June 4th, 2011, 15:18

My Baby.

VFC HK416 CQB

- Guarder TB Inner Barrel 407mm.
- EoTech 551 Replica
- Huang MIAD Grip.
- Magpul PTS AFG2
- VS Hop Up unit.
- Larue Style index clips.
- Screw-on Silencer.
- Green Label 80rnds PMAGs

The only thing left to change on the gun besides the Internals when they fail, is a Magpul PTS UBR Stock. Gotta wait a few weeks cause im out of cash :P

:^) · June 5th, 2011, 23:03

Another one of my ghetto mods.
I used this for the zombie game and it so much love. <3

I found some electrical tape.

and of course I well have my fuck off flashlight (named by gato)

and my duck tape magpuls

FOX_111 · June 5th, 2011, 23:08

And they let you on the field with that?

c3sk · June 5th, 2011, 23:10

Quote:

Originally Posted by FOX_111

And they let you on the field with that?

Fox, he was a zombie killing machine, you should have seen him.

It was impressive.

AlLeBlanc · June 5th, 2011, 23:30

WOW this is ghetto. Nigerian ghetto :P

Strelok · June 5th, 2011, 23:45

Umarex/KWA USP.

Got this saturday from AMOS (Since he's awesome.) Gamed it the same day, absolutely loving this thing!

I wanna get rid of the whole warning shit whiteprinted onto the left side of the frame, anyone know a good way to get rid of it without marring the paint on the slide?

Thanks!

Cobrajr122 · June 6th, 2011, 00:52

Quote:

Originally Posted by FUCK BONO, I'LL KILL U2

Another one of my ghetto mods.
I used this for the zombie game and it so much love. <3

Fuck Yes

Slow · June 6th, 2011, 00:54

Kill u2 strikes again lol

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

June 2nd, 2011, 00:42	#361
FlyGuy Trader rating Join Date: Jul 2008 Location: FL120 and below...	Apologies for the craptacular iPhone 4 photo (grain/noise/flash way too hot), but I was just tinkering around with some gear and had a thought... What if, I were to take some of the (expensive) optics off my M4 and put them onto my MP7? CQB zombie killer perhaps?? Results: Airsoft Items: KSC (Taiwan ver) MP7 GBB SMG HK "trades" el-cheap-o noise can (but it does have foam inside so it sort-of works) Real Steel Items: Insight ATPIAL AN/PEQ-15 Aimpoint T1 Micro Surefire V2 Vampire IR/vis flashlight in a Daniel Defense offset mount Magpul RSA Removed original iron sights because it somehow didn't look "right" with them on combined with the rest of the hardware, that and not quit enough room on the top rail to accomodate everything unless the irons were removed. Perhaps I'll fiddle around some more and see if I can make it work...or not and I'll just put the items back on my primary rifle. 'Fly __________________ Team GHOSTS - Fides et Amicitia G-68** "Can't keep my eyes from the circling skies, Tongue-tied and twisted Just an earth-bound misfit, I" Learning To Fly © 1986 Pink Floyd

June 2nd, 2011, 00:58	#362
Short Round Najohn Trader rating Join Date: Aug 2009 Location: SkyDome	Thats sexy __________________

June 2nd, 2011, 08:55	#363
Disco_Dante Trader rating Join Date: Oct 2007 Location: GTA	Looks pretty hot flyguy. I do love your real T1 so much. __________________ Not for glory, nor riches, nor honours, but for freedom alone, which no good man gives up except with his life.

June 2nd, 2011, 10:21	#364
MilanWG Perroz Designs Trader rating Join Date: Jul 2003 Location: Toronto, ON	Nice Fly - all you need is the hk suppressor and your golden __________________

June 2nd, 2011, 13:48	#365
manchovie Trader rating Join Date: Dec 2003 Location: Toronto	rike-a sooo http://www.wgcshop.com/wgc2008/main/...p7&catid=&cat= __________________ experienced toronto gun doctor, hundreds of guns serviced manchovie gun doc thread! my b/s rating

June 2nd, 2011, 18:22	#366
FlyGuy Trader rating Join Date: Jul 2008 Location: FL120 and below...	Milan, That's one HUGE can on the front of a relatively small gun! It must seriously make it front-heavy from a balance point of view?? Not liking it a whole lot but it appears that particular soldier does...seen some mud and dirt by the looks of it. AAC makes a much nicer one IMHO! Manchovie, NOT a fan of the VFC silencer. If you look closely at the text printed on it, there's a long-winded propaganda statement about the licensing of the trademarks etc. There's a better pic of it on RW, but the blah blah blah stencilled on it just turned me off. The one I chose to put on my gun has nice HK trades (wrong caliber) but at least isn't ruined with useless Umarex propaganda! It was purchased from Airsoftparts. 'Fly __________________ Team GHOSTS - Fides et Amicitia G-68 "Can't keep my eyes from the circling skies, Tongue-tied and twisted Just an earth-bound misfit, I" Learning To Fly © 1986 Pink Floyd

June 3rd, 2011, 03:03	#367
Shirley A-56 aka Mr.Hitman Trader rating Join Date: Nov 2007 Location: Toronto, ON	NSW mp7! Add the can __________________ CANADIAN AIRSOFT PRACTICAL SHOOTING (CAPS) CAPS DIRECTOR # 0047

June 5th, 2011, 23:03	#369
:^) Pizza is a Vegetable Trader rating Join Date: Nov 2009 Location: Waterloo	Another one of my ghetto mods. I used this for the zombie game and it so much love. <3 I found some electrical tape. and of course I well have my fuck off flashlight (named by gato) and my duck tape magpuls

June 5th, 2011, 23:08	#370
FOX_111 Le Roi des poissons d'avril Trader rating Join Date: Dec 2003 Location: Terrebonne, Québec	And they let you on the field with that? __________________ Vérificateur d'âge: Terrebonne

June 5th, 2011, 23:30	#372
AlLeBlanc Trader rating Join Date: Jun 2010 Location: Montréal	WOW this is ghetto. Nigerian ghetto :P

June 5th, 2011, 23:45	#373
Strelok Trader rating Join Date: Jun 2006 Location: Brandon Manitoba	Umarex/KWA USP. Got this saturday from AMOS (Since he's awesome.) Gamed it the same day, absolutely loving this thing! I wanna get rid of the whole warning shit whiteprinted onto the left side of the frame, anyone know a good way to get rid of it without marring the paint on the slide? Thanks!

June 6th, 2011, 00:54	#375
Slow Loves Furries Trader rating Join Date: Oct 2009 Location: Manitoba	Kill u2 strikes again lol __________________ If ASC were real life, there would be no Chuck Norris, only CDN_Stalker MANITOBA IVAN

This is H&K thread

Airsoft Media