AGM Full Metal MP44

Donster · February 21st, 2009, 15:36

Can i get a hell ya?

that is great. my biggest grip about WWII was that as much as i wanted to play it, i couldn't use my Tanaka Kar98k in the winter. And since they dont make a G43 (unfortunately) and the AGM MP40 sub just isn't my style, i have been dying for a WWII gun that i can use in the winter. This not only solves that problem, but because its a rifle, and should have a longer inner barrel, one should be able to acheive better accuracy. I hope it takes standard inner barrels and upgrade parts cause once this hits canada, im going to pick up a Heer uniform from ATF and hit it up with the WWII guys. Now i can rock it in the winter (if we are lucky, the gun will have a V3 mechbox and that = better, more reliable winter play

)

Andres · February 21st, 2009, 20:45

I'll just hack the hell out of a 28' and make my Marui look more the part :P Also, we might finally get our drum mag D:

Latvian291 · February 23rd, 2009, 10:45

Quote:

Originally Posted by youonlywish

Also, 1928 Tommy.
http://www.kapowwe.com/Merchant2/mer...r&Store_Code=R

I notice it's not quite accurate. The cocking handle should be on the top of the receiver. Looks like they just "dressed up" a Marui M1A1 and are hoping airsofters aren't expert enough to notice.

Dogfood · February 23rd, 2009, 13:25

I'm in for the MP-44! Wanted one for years!

MrEvolution · February 23rd, 2009, 13:47

Quote:

Originally Posted by Submachinehead

I notice it's not quite accurate. The cocking handle should be on the top of the receiver. Looks like they just "dressed up" a Marui M1A1 and are hoping airsofters aren't expert enough to notice.

True, but beggars cant be choosers

theshaneler · February 23rd, 2009, 13:49

i think the drum mag from the tommy will be in higher demand than the tommy itself... i know a few guys around here that have m1a1's and they all want drum mags but can't find

Andres · February 23rd, 2009, 20:00

Quote:

Originally Posted by Submachinehead

I notice it's not quite accurate. The cocking handle should be on the top of the receiver. Looks like they just "dressed up" a Marui M1A1 and are hoping airsofters aren't expert enough to notice.

Honestly, I'm hoping it IS a dressed up M1A1, so I can just steal those drum mags without any modifying!

MrBond · February 23rd, 2009, 20:17

I've just asked MOPIC, he can get the STG44 for 500$ shipped...

CrackShot 07137 · February 24th, 2009, 00:11

Quote:

Originally Posted by tattoodan

I've just asked MOPIC, he can get the STG44 for 500$ shipped...

$500 not bad at all

The link has some new pics

Want sooo bad

BootYourFace · February 24th, 2009, 00:21

real or fake wood? pretty sure 50 would sell NP in canada. nevermind all across america.

Now instead of all the germans running around with meh MP40's. we can now run around with meh stg44's! joy!

Doc7144 · February 24th, 2009, 00:47

Already the excitement is obvious and if AGM Does make an MG42 as well then the result will be a huge boost to the interest in WW11 airsofting, its long over due especially here out west. My kit is having an effect in interest but some new weapons will be the icing on the cake. Our local supplier is looking into it as we speak, if he can bypass Kapowe and go to the supplier he may get a sweeter deal >> Waiting... Waiting >>> LOL. Doc

Latvian291 · February 24th, 2009, 08:07

Quote:

Originally Posted by Doc7144

Already the excitement is obvious and if AGM Does make an MG42 as well then the result will be a huge boost to the interest in WW11 airsofting, its long over due especially here out west. My kit is having an effect in interest but some new weapons will be the icing on the cake. Our local supplier is looking into it as we speak, if he can bypass Kapowe and go to the supplier he may get a sweeter deal >> Waiting... Waiting >>> LOL. Doc

If you build it they will come!

kullwarrior · February 24th, 2009, 09:51

hmm a feet spread in 50m, sounds kinda bad, gearbox 400+fps, stock was crappy plastic...
thats according to vid review

YouTube - Review of the AGM MP44/STG44 from Kapowwe.com

Yorkie · February 24th, 2009, 10:56

Quote:

Originally Posted by Doc7144

Already the excitement is obvious and if AGM Does make an MG42 as well then the result will be a huge boost to the interest in WW11 airsofting, its long over due especially here out west.

Problem is, there aren't any weapons being developed for the Allied side as a counterpoint to these to make a decent game of it. You'll all end up as Germans going around shooting each other, and if you're going to do that you might as well pull an American uniform on...

Donster · February 24th, 2009, 11:09

ill wait once they make a full wood stock (as im sure they will) and a tightbore. by any chance, do we know what kind of mechbox it is? if its a standard V3, than it might just take standard upgrades. Lets hope for the best

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

February 23rd, 2009, 13:25	#19
Dogfood Trader rating Join Date: Jul 2006 Location: Oakville Ont	I'm in for the MP-44! Wanted one for years! __________________ *Ontario Airsoft WW2 Reenactors* MP-40, HFC M712, WA M1911A1, TM Thompson TM AK-47 x 2, K98 x 2 , M4, MP-44, Luger, FAL, Sten If all else fails USE THE SHOVEL!

February 23rd, 2009, 20:17	#23
MrBond formerly tattoodan Trader rating Join Date: Jan 2009 Location: Montreal	I've just asked MOPIC, he can get the STG44 for 500$ shipped... __________________ *Team Mandrills*

February 24th, 2009, 09:51	#28
kullwarrior Trader rating Join Date: Jan 2008 Location: Edmonton, AB, Canada	hmm a feet spread in 50m, sounds kinda bad, gearbox 400+fps, stock was crappy plastic... thats according to vid review YouTube - Review of the AGM MP44/STG44 from Kapowwe.com __________________

February 21st, 2009, 15:36	#16
Donster Trader rating Join Date: Jul 2007 Location: GTA	Can i get a hell ya? that is great. my biggest grip about WWII was that as much as i wanted to play it, i couldn't use my Tanaka Kar98k in the winter. And since they dont make a G43 (unfortunately) and the AGM MP40 sub just isn't my style, i have been dying for a WWII gun that i can use in the winter. This not only solves that problem, but because its a rifle, and should have a longer inner barrel, one should be able to acheive better accuracy. I hope it takes standard inner barrels and upgrade parts cause once this hits canada, im going to pick up a Heer uniform from ATF and hit it up with the WWII guys. Now i can rock it in the winter (if we are lucky, the gun will have a V3 mechbox and that = better, more reliable winter play )

February 21st, 2009, 20:45	#17
Andres Trader rating Join Date: Aug 2006	I'll just hack the hell out of a 28' and make my Marui look more the part :P Also, we might finally get our drum mag D:

February 24th, 2009, 00:21	#25
BootYourFace face booty man Trader rating Join Date: Apr 2008 Location: Winnipeg, MB	real or fake wood? pretty sure 50 would sell NP in canada. nevermind all across america. Now instead of all the germans running around with meh MP40's. we can now run around with meh stg44's! joy!

February 24th, 2009, 00:47	#26
Doc7144 Trader rating Join Date: Jan 2008	Already the excitement is obvious and if AGM Does make an MG42 as well then the result will be a huge boost to the interest in WW11 airsofting, its long over due especially here out west. My kit is having an effect in interest but some new weapons will be the icing on the cake. Our local supplier is looking into it as we speak, if he can bypass Kapowe and go to the supplier he may get a sweeter deal >> Waiting... Waiting >>> LOL. Doc

February 24th, 2009, 11:09	#30
Donster Trader rating Join Date: Jul 2007 Location: GTA	ill wait once they make a full wood stock (as im sure they will) and a tightbore. by any chance, do we know what kind of mechbox it is? if its a standard V3, than it might just take standard upgrades. Lets hope for the best

AGM Full Metal MP44

WW1, WW2