![]() |
![]() |
#16 | |
AKA Daniel Ochoa
|
oh i'm sure that with enough ingenuity they can make a "kriss" in any calibre possible that utilizes that recoil redirection thingy. The magwell, barrel, bolt/extractor and a lot of the receiver will change but imagine the stopping power!
You're right it won't be a sub machinegun anymore. it would be an assault rifle at least. Why stop at 7.62 nato? Let's try 12 gauge, .50bmg, 20mm...or even 30mm!...then A SIX POUNDER! a boy can dream can't he? ![]() Quote:
|
|
![]() |
![]() |
![]() |
#17 |
hmm I like that it uses glock mags, means you don't have to go buy a bunch of new GBB mags.
Notice how almost all GBBRs so far that have been successful have used "m4" mags *i know they arn't called that* And now that we have a m14 GBBR... I can see a ScarL ![]() As for the clear "cansoft" version it should be easy enough to get around that with a co2 being shipped with it for certification. |
|
![]() |
![]() |
![]() |
#18 | |
Quote:
Anyways the barrel I'm guessing is going to be pretty short on the KRISS seeing that they still got to put a hop-up in it and everything. It's probably not going to be a very successful gun all the CODMW2 kids will be drooling over it though. |
||
![]() |
![]() |
![]() |
#19 | |
Quote:
|
||
![]() |
![]() |
![]() |
#20 |
Harvester of Noobs' Sorrow
|
i wonder if the superV system could be adapted to fire a rifle round in a bulpup arrangement. that would be sick. from what i saw in the cuts out views in the video, the trigger mechanism sits above the barrel/mag (like it's upside down).
can't wait to see how KWA is going to pull this off.
__________________
Weapons Technician / Gunsmith Don't look at me, I don't know, lol ¯\(°_o)/¯. |
![]() |
![]() |
![]() |
#21 | |
AKA Daniel Ochoa
|
I think you mean SCAR H. The SCAR H and the M14 use different mags. If anything the SCAR H mag (when they make it) will probably be closer to a SCAR L/M4's magazine since an M14's rocks into the magwell.
Quote:
|
|
![]() |
![]() |
![]() |
#22 |
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
It's so hideous.....I MUST HAVE IT!!!
|
![]() |
![]() |
![]() |
#23 |
Najohn
|
Well looks like I need to learn about GBBRs now
![]() |
![]() |
![]() |
![]() |
#24 |
Super V system is really good for short barrel weapon with high recoil / rate of fire and short range like the Kriss... even though the demonstration on TDI website is full of crap when they fire UMP. I fired both, I never felt enough recoil on an UMP to be pushed back like that... or get such elevation.
And the barrel is much smaller than an MP7 one (for SMG). It's even smaller than a Colt 1911 one. On a bulpup rifle I wanted to put that into my assault rifle (I'm on the third prototype) but when I ran the simulation on the computer I found it pretty annoying : - Behind the trigger : makes the stock going down and actually adding to the recoil... like basic physics would tell and not exactly what I was looking for ![]() - Between hand : brutaly changes the balance of forces and in the end is more tiring on the arms than a standard design where all the recoil is going in your chest/shoulder (depending if you know how to handle a gun or being a BWD kikoolol). I just removed that entirely in the end. I'll make an airsoft version when I'll come up with a definitive version ![]() |
|
![]() |
![]() |
![]() |
#26 |
formerly haakon45
|
anyone figure if it will come out as safe soft with velocity or we'll have to get it on the boards here?
|
![]() |
![]() |
![]() |
#27 |
Doubt it, the kriss is an SMG GBB so around 370 at 20 degrees Celsius (and no I don`t know how much Fahrenheit it does) and has a one piece polymer body, unless you want a fully (and ugly) transparent model, you`ll have to bring one through retailer.
|
|
![]() |
![]() |
![]() |
#28 |
GBB Whisperer
|
Looks like KWA is releasing the first prototype at SHOT Show 2011, happening THIS weekend!
Click the link for more details: http://airsoft.ua/en/news/802.html |
![]() |
![]() |
![]() |
#29 | |
![]() |
Quote:
I like the two tone setup. Hopefully it won't suck. It would be hugely disappointing if it was just another [typically configured] GBB SMG in a Kriss body, complete with the traditional "recoil" (I'm being optimistic and thinking of the KWC Mini Uzi). Not to mention KWA's been a mixed bag lately.
__________________
|
|
![]() |
![]() |
![]() |
#30 | |
Crackers
|
Quote:
and it would be nice if they made the gun able to take glock mags..... |
|
![]() |
![]() |