January 17th, 2014, 17:48 | #226 |
yea i was hoping someone on here would have experience with the king arms p90. Ill keep trying to find some info. My highcap actually works fine amazingly. i have filled it up and fired on full auto 3 times. No feeding issues and emptied the whole mag each time. maybe im lucky who knows haha
|
|
January 18th, 2014, 11:13 | #227 |
I have a KA P90, 2x 100rd midcap and 1x 300 hicap. Allbof them are KA. I had more problems at first with the hicap. I never had misfeed with the midcap. I'm rarely shooting in full auto... I'm running Bioval 0.20 BBs.
Last edited by Mugshot; January 20th, 2014 at 09:43.. |
|
January 20th, 2014, 00:20 | #228 |
This is P90 thread
New to the forums, and new to Airsoft. I decided to go with a P90 as my primary (since it is one of my favourite guns).
It's a KA and I have 2x Mids and 1 HiCap. I upgraded it with the following: Angel Customer 6.01 250mm tight bore Angel Custom CNC Thor Hopup Angel Custom Aluminum h-nub and W bucking. Hawk aluminum nozzle (not installed yet) And a Red/Green Dot sight. Looking forward to playing this season. |
|
January 20th, 2014, 04:26 | #229 |
What brand of mid caps?
|
|
January 20th, 2014, 08:01 | #230 |
Mine are all 3 KA. I have no more misfeed on the hicap since i sprayed some silicon inside.
Last edited by Mugshot; January 20th, 2014 at 09:43.. |
|
January 20th, 2014, 11:59 | #231 |
January 20th, 2014, 15:20 | #232 |
I hated using my Highcap. It was a last resort with my setup.
It would feed well then stop. I would have to tap the top of the mag (over the winding gears) and I'd hear it whizzz and then catch. Did it with both Madbulls and Bastards. I have zero feeding issues with my TM lows and my KA Mids.
__________________
-Matt |
|
January 20th, 2014, 20:53 | #233 |
i really want to know if the MAG 168 round midcaps work on the king arms. Thats my first choice.
|
|
January 26th, 2014, 10:48 | #234 |
Hi all,
As of yesterday, I've decided to purchase my first gun and get into airsoft! I've been obsessed with the P90 for years, so that'll be my starting point. I've done about a dozen hours of research, and I'm considering the following items to start out with. TM P90 TR Sightmark Sure Shot Reflex Sight - http://www.opticsplanet.com/yukon-si...-sm13003b.html Laserlyte Green Laser System - http://www.opticsplanet.com/laserlyt...stem-k-15.html Angled Flashlight Mount - http://www.torontoairsoft.com/ACM-An...ch_p_1058.html Hurricane butt extender (I'm 6'1) I'll worry about upgrading internal components later. I'm having a bit of difficulty figuring out whether these three additions are the correct rail type, and whether the laser and flashlight mount will fit the side rails on the TM P90 TR. (The green laser is more for fun than for anything ) Any help would be greatly appreciated. Last edited by hypostatic; January 26th, 2014 at 20:28.. |
|
January 27th, 2014, 18:24 | #235 | |
Najohn
|
Quote:
I don't know where you are ordering from, if you are in Canada make sure OpticsPlanet will ship those items into Canada. I know they have a lot of ITAR stuff on their site which they will not ship to Canada. I have an odd feeling that the laser and red dot will be on ITAR so checkout that before you buy it. For the Flashlight mount make sure it doesn't impede with the insertion of the magazine. Personally I would say avoid getting the Laser, if you are set on getting one for your own preference sure get it, however at least in Canada especially Ontario they are not common/frowned upon. Regardless if it is rated safe for usage, you or anyone else don't have the right to fuck around with someone else's eyes and there is always that possibly of something going wrong. Now that is not to say you would or will do that, I am just stating my opinion on the topic, I am sure others feel differently. If you just want a laser show then I guess that's all up to you, I just would see that being a waste of money though at that point. For the Butt extender, I'd say get the Angel Custom one (http://store.bentbarrelairsoft.com/c...mounting-point). It will be more sturdy (made of plastic) which locks into the stock like the original buttpad, than the Hurricane one (Rubber) which goes over the entire stock of the gun. Honestly, I'd say get that Angel Custom Stock extension, a good flashlight and Red Dot (Check Airsoft Store Canada) and you will be set. TM P90s are a great pick for a base/starter gun. And yes, the Laser and Flashlight mount would fit on the side rails. Last edited by Short Round; January 27th, 2014 at 18:26.. |
|
January 27th, 2014, 23:15 | #236 |
I always had issues with my hicap, midcaps were fine (just don't fill them all the way, 5 less than max is good) on my echo1 p90. My friend that I sold it to, doubled the spring in the hicap and it feeds much better now.
__________________
|
|
January 30th, 2014, 21:01 | #237 |
will always be Mike Litoris in our hearts
|
Quick question for you guys. What gun cases do you use to transport your P90s? Im having a difficult time finding a hard plastic case that is under 30" in length.
Thanks, Jordan |
January 30th, 2014, 23:31 | #238 | |
Najohn
|
Quote:
But there is always this https://www.007airsoft.com/product.p...ub=50&view=508, it's by SRC and roughly 25". I personally run a Condor 36" soft case because I like to carry a backup gun as well as a bunch of extra parts and crap in case I need it. However hopefully in the future whenever I am not missing out on their famous sales I plan on buying a LCT Load-Out bag because I am lazy as fuck and want everything I need for games in one bag/a bag with wheels. Last edited by Short Round; January 30th, 2014 at 23:34.. |
|
January 31st, 2014, 09:36 | #239 |
"bb bukakke" KING!
|
I have a mezzi 36" case. I haven't quite decided how I want to lay it out yet, so I haven't cut any foam for it yet but I can put the p90 in it plus about 5 or 6 mags.
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know. |
January 31st, 2014, 18:54 | #240 |
Quick question - I was set on buying a TM P90 TR, but a retailer I spoke to said that it is illegal in Canada. What??? How are they for sale at so many stores if they are illegal? And how are they used by so many people?
|
|
|
Bookmarks |
|
|