How to install a metal body??

ki_da_man · November 2nd, 2005, 13:28

So I have broke my M-16A2 upper reciever (plastic) twice in as many seasons so I have opted to spend the extra money to buy a metal body (SR-15). I know it's a lengthy process to install a metal body...are there any sites or guides that I could find some information on how to do this?

P.S. I would rather learn how to do it myself rather than paying for it to be done.

Nathan

firemachine69 · November 2nd, 2005, 14:42

Have you ever done any mods to a gun (internally)?

Sgt_Lynch · November 2nd, 2005, 14:58

You miht want to pay someone with some experience. Most bodies require some Dremeling of some kind and alot of tweeking.

ILLusion · November 2nd, 2005, 15:14

nathan,

the receiver i spoke to you about comes with instructions.

really bad instructions, but you can still understand it.

Again, the biggest thing you have to remember is to pull the charging handle back to accept the gearbox and to be careful when maneuvering the tabs around the bushings/bearings. Never lift the tab or you'll snap it. If anything, flex the base and not the tip of the tab.

You won't find details on those particular parts in any guide or instruction set.

The rest of the installation is simple and not that far off from a plastic body. The entire receiver has already been fitted.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

November 2nd, 2005, 13:28	#1
ki_da_man Trader rating Join Date: Oct 2003 Location: Stoney Creek	How to install a metal body?? So I have broke my M-16A2 upper reciever (plastic) twice in as many seasons so I have opted to spend the extra money to buy a metal body (SR-15). I know it's a lengthy process to install a metal body...are there any sites or guides that I could find some information on how to do this? P.S. I would rather learn how to do it myself rather than paying for it to be done. Nathan __________________ You know what they say... people in glass houses sink ships!!

November 2nd, 2005, 14:58	#3
Sgt_Lynch Trader rating Join Date: Dec 2001 Location: Anger Management class.	You miht want to pay someone with some experience. Most bodies require some Dremeling of some kind and alot of tweeking. __________________ When the going gets tough... the tough go cyclic.

November 2nd, 2005, 15:14	#4
ILLusion GBB Whisperer Trader rating Join Date: Jun 2002 Location: Toronto	nathan, the receiver i spoke to you about comes with instructions. really bad instructions, but you can still understand it. Again, the biggest thing you have to remember is to pull the charging handle back to accept the gearbox and to be careful when maneuvering the tabs around the bushings/bearings. Never lift the tab or you'll snap it. If anything, flex the base and not the tip of the tab. You won't find details on those particular parts in any guide or instruction set. The rest of the installation is simple and not that far off from a plastic body. The entire receiver has already been fitted. __________________ *Advanced Airsoft Armaments and Enhancements* Quick to the gun, sure of your grip. Quick to the threat, sure of your shot. Diligentia, Vis, Celeritas Accuracy, Power, Speed

How to install a metal body??

Doctor's Corner