lithium stock pipe issues

[hadur]

okay, my girlfriend purchases me this stop pipe for christmas http://shop.ehobbyasia.com/king-arms...tock-pipe.html

and today i received this metal body
http://shop.ehobbyasia.com/gandp-mk1...16-series.html

i attempted to do a test assembly today and noticed that there is no way for me to get my wiring into the stock tube( i know that some lithium stock tubes have an extra groove cut in them for the wiring).. where the stock tube and the nub on the metal body meet has a VERY low tolerance, which .. is normally not a problem, except that i need to get my wiring into that tube. does anyone have suggestions on how i may fix this?

also.. is there any " too short" length on the stock nub on the metal body.. cutting it is probably something that should be done to allow for the most possible room in the stock tube, but i dont want to cut it too short , or leave it too long.

thanks for the advice

[hadur]

nevermind lol this thread can be deleted, its a rather simple solution, i just need to file a channel in the stock tube itself,and cut the post to the reccomended 25 mm, sorry for wasting anyones time.