Taking apart a AGM M4 GBBR mag

[sushicake]

How do I do this? I looked all over ASC and cant find anything all I find is "I took the mag apart and lubed it" can anyone explain how to take the mag apart.

[m102404]

I don't remember it being all that hard....just knock out all the pins (there's 9? or so of them) and it kind of falls/pops apart. There's a lot of little parts...just keep the pins straight on where they go, there's a couple of different diameters and lengths.

[sushicake]

Originally Posted by m102404

I don't remember it being all that hard....just knock out all the pins (there's 9? or so of them) and it kind of falls/pops apart. There's a lot of little parts...just keep the pins straight on where they go, there's a couple of different diameters and lengths.

poped all the pins out and its not coming out...

[BORDENSNIPER]

ensure all the pins are popped out.

grab the front plastic piece that u just took the pins out of and gently pull on it. it should easily come off. When u take it off ensure that the spring doesnt fly in ur face.

then take off the 2 aleen screws from the top of the magazine.

then take the inner mag assembly out, it should basically easily come out.

just make sure u keep track of all the little parts that the mag has and remember how to put it back together.

[Qlong]

http://www.youtube.com/user/LuisG218.../1/MWosGi-XfEk

[Hash Vapor]

Was going to quote the same link. Youtube is the best bet for questions like this.