Converting G36C to G36

blade_x23 · September 9th, 2009, 22:53

Planning on converting a friend's TM G36C into a G36 full size (not the one I have for sale). Going to be getting the G&P G&P G36 Handguard w/ Bipod & Barrel Set. What size of inner barrel and cylinder type would I need to complete the conversion?

chaosnemesis · September 10th, 2009, 08:11

G36C has a barrel length of 249mm and a ported cylinder to match. The cylinder will support upto a 363mm barrel which is a G36K length. If you change your barrel to a full length G36 you'd have to change your cylinder to a non ported one as well. (sorry i don't remember what the length is needed for a full G36. I beleive it's 495mm)

Mr. G36! · September 10th, 2009, 12:18

469mm inner barrel, and I believe the cylinder shouldn't ported at all; it's more or less just a metal pipe with that length of barrel.

This is where I documented the changing of mine if you're interested.

(Page 1 is the G36C, page 2 is the G36)

kalnaren · September 10th, 2009, 22:08

The inner barrel length for a full size G36 is 494mm. You should be able to fit a 509mm (standard M16 barrel) into one without issue though, as it won't stick out beyond the "solid" part of the flashider.

blade_x23 · September 11th, 2009, 00:39

Thanks for the help guys.

chaosnemesis · September 11th, 2009, 05:56

Quote:

Originally Posted by Mr. G36!

469mm inner barrel, and I believe the cylinder shouldn't ported at all; it's more or less just a metal pipe with that length of barrel.

This is where I documented the changing of mine if you're interested.

(Page 1 is the G36C, page 2 is the G36)

yeah it's 495 (just checked mine)or 494 (depending on manufacturer whatever...) and G36C comes with a ported cylinder. I just said he'd have to change his cylinder to NON-ported as well to match the new barrel length.

blade_x23 · September 11th, 2009, 06:06

I'm kinda aware of cylinder types, I was moreso unsure about barrel size but thanks for confirming that chaos.

Donster · September 11th, 2009, 07:08

i was under the impression that there is a difference in the length of the stock as well. they sell G36K stocks (G&P makes them).

blade_x23 · September 11th, 2009, 07:10

Not worried as much about the stock, as it's more of a barrel length conversion more than a full conversion. The user simply wants a longer barrel length (without using a silencer), so we opted to simply get a front kit for a G36. However, it is a good point that the 36c is a bit smaller stock. Maybe a bit later down the road we'll get a new one. But we'd also need to get a new top rail (the magnified version) to complete the look as well, so it would be a bit further down the road.

Kos-Mos · September 13th, 2009, 21:59

G36 and K stocks are 1" longer than a C stock.

I personally can't use a C stock properly...

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

September 9th, 2009, 22:53	#1
blade_x23 Trader rating Join Date: Mar 2007 Location: Chilliwack BC	Converting G36C to G36 Planning on converting a friend's TM G36C into a G36 full size (not the one I have for sale). Going to be getting the G&P G&P G36 Handguard w/ Bipod & Barrel Set. What size of inner barrel and cylinder type would I need to complete the conversion? __________________ -=LieutenantPliers=- Last edited by blade_x23; September 10th, 2009 at 04:12..

September 10th, 2009, 12:18	#3
Mr. G36! Trader rating Join Date: Jul 2007 Location: Beautiful Thunder Bay, where dreams become nightmares!	469mm inner barrel, and I believe the cylinder shouldn't ported at all; it's more or less just a metal pipe with that length of barrel. This is where I documented the changing of mine if you're interested. (Page 1 is the G36C, page 2 is the G36) __________________ Airsoft It's all fun and games until someone gets hurt...and then it becomes sport!

September 11th, 2009, 00:39	#5
blade_x23 Trader rating Join Date: Mar 2007 Location: Chilliwack BC	Thanks for the help guys. __________________ -=LieutenantPliers=-

September 10th, 2009, 08:11	#2
chaosnemesis Trader rating Join Date: Nov 2008 Location: Toronto	G36C has a barrel length of 249mm and a ported cylinder to match. The cylinder will support upto a 363mm barrel which is a G36K length. If you change your barrel to a full length G36 you'd have to change your cylinder to a non ported one as well. (sorry i don't remember what the length is needed for a full G36. I beleive it's 495mm)

September 11th, 2009, 06:06	#7
blade_x23 Trader rating Join Date: Mar 2007 Location: Chilliwack BC	I'm kinda aware of cylinder types, I was moreso unsure about barrel size but thanks for confirming that chaos. __________________ -=LieutenantPliers=-

September 11th, 2009, 07:08	#8
Donster Trader rating Join Date: Jul 2007 Location: GTA	i was under the impression that there is a difference in the length of the stock as well. they sell G36K stocks (G&P makes them).

September 11th, 2009, 07:10	#9
blade_x23 Trader rating Join Date: Mar 2007 Location: Chilliwack BC	Not worried as much about the stock, as it's more of a barrel length conversion more than a full conversion. The user simply wants a longer barrel length (without using a silencer), so we opted to simply get a front kit for a G36. However, it is a good point that the 36c is a bit smaller stock. Maybe a bit later down the road we'll get a new one. But we'd also need to get a new top rail (the magnified version) to complete the look as well, so it would be a bit further down the road. __________________ -=LieutenantPliers=-

Converting G36C to G36

Doctor's Corner