G36c Accuracy problem

Flowstone · September 10th, 2009, 14:32

Picked up a TM G36c and its either not aligned with the Iron Sights, or its shots are coming out too low.

Basically everything looks like its deviating about 5-10 Degrees down from the mark made by the iron sights.

Tryed equipping a Red Dot scope on it and it won't adjust low enough to match up with the shots.

So im guessing its something to do with the hop up. but i have no idea how to properly adjust this and get a better result. also i think i may have screwed up the way the mags feed into the hopup while i was "tinkering".

Any ideas on how to get it to shoot more leveled and match up with the iron sights?

I might need to take it to a gundoc...

Skladfin · September 10th, 2009, 14:47

how far are you shooting at the target? Honestly it sounds like you are shooting too close.

rustysniper · September 10th, 2009, 15:28

Have you adjusted the hop up?

panzergrenadier · September 10th, 2009, 15:35

Have you cleaned the barrel? May be dirty inside... that can affect shot drastically

Styrak · September 10th, 2009, 16:06

You don't know how to adjust the hopup you say? Or you're adjusting it and it isn't doing anything?

Mr. G36! · September 10th, 2009, 16:16

When you picked it up, was it new? Is it stock?

Flowstone · September 11th, 2009, 12:05

appears to be stock, but its not new. i suppose i am shooting too close. how far away should i be to set and adjust my red dot?

and secondly, i really don't know how to adjust my hop up/what i am adjusting when i adjust my hop up.

Also, where do you recommend i pick up a cleaning kit if im in the GTA?

thanks alot for the answers guys

AngelusNex · September 11th, 2009, 12:16

Quote:

Originally Posted by Flowstone

appears to be stock, but its not new. i suppose i am shooting too close. how far away should i be to set and adjust my red dot?

and secondly, i really don't know how to adjust my hop up/what i am adjusting when i adjust my hop up.

Also, where do you recommend i pick up a cleaning kit if im in the GTA?

thanks alot for the answers guys

shoot from at least 50-75 feet MINIMUM or your sights will be pretty useless in games. for the hopup, pull back the charging handle (underneath the top rail) to open the ejection port on the right side of the gun, there will be a sort of wheel, spin it downwards for more hop, up for less (MAY have the directions backwards for adjusting the ruber though)

Flowstone · September 12th, 2009, 13:13

Thanks alot dude, sorry for the newbish comments. now the only question is, where am i going to find 50 feet to use as a "range". lol

Skladfin · September 12th, 2009, 13:31

field

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

September 10th, 2009, 14:32	#1
Flowstone Trader rating Join Date: Sep 2009 Location: Toronto, ON	G36c Accuracy problem Picked up a TM G36c and its either not aligned with the Iron Sights, or its shots are coming out too low. Basically everything looks like its deviating about 5-10 Degrees down from the mark made by the iron sights. Tryed equipping a Red Dot scope on it and it won't adjust low enough to match up with the shots. So im guessing its something to do with the hop up. but i have no idea how to properly adjust this and get a better result. also i think i may have screwed up the way the mags feed into the hopup while i was "tinkering". Any ideas on how to get it to shoot more leveled and match up with the iron sights? I might need to take it to a gundoc...

September 10th, 2009, 15:28	#3
rustysniper Trader rating Join Date: Apr 2008 Location: Canal Flats BC	Have you adjusted the hop up? __________________ Semper Primus: Always First

September 10th, 2009, 15:35	#4
panzergrenadier Trader rating Join Date: Dec 2005 Location: Sherwood Park, AB	Have you cleaned the barrel? May be dirty inside... that can affect shot drastically __________________ Gumbercules!?! I love That Guy!!!

September 10th, 2009, 14:47	#2
Skladfin Trader rating Join Date: Dec 2006 Location: Glace Bay, Nova Scotia	how far are you shooting at the target? Honestly it sounds like you are shooting too close.

September 10th, 2009, 16:06	#5
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	You don't know how to adjust the hopup you say? Or you're adjusting it and it isn't doing anything? __________________ Airsoft Sales and Repair/Upgrade Services

September 10th, 2009, 16:16	#6
Mr. G36! Trader rating Join Date: Jul 2007 Location: Beautiful Thunder Bay, where dreams become nightmares!	When you picked it up, was it new? Is it stock? __________________ Airsoft It's all fun and games until someone gets hurt...and then it becomes sport!

September 11th, 2009, 12:05	#7
Flowstone Trader rating Join Date: Sep 2009 Location: Toronto, ON	appears to be stock, but its not new. i suppose i am shooting too close. how far away should i be to set and adjust my red dot? and secondly, i really don't know how to adjust my hop up/what i am adjusting when i adjust my hop up. Also, where do you recommend i pick up a cleaning kit if im in the GTA? thanks alot for the answers guys

September 12th, 2009, 13:13	#9
Flowstone Trader rating Join Date: Sep 2009 Location: Toronto, ON	Thanks alot dude, sorry for the newbish comments. now the only question is, where am i going to find 50 feet to use as a "range". lol

September 12th, 2009, 13:31	#10
Skladfin Trader rating Join Date: Dec 2006 Location: Glace Bay, Nova Scotia	field

G36c Accuracy problem

Doctor's Corner