1911 grips = gun not working? WTF?

Thenooblord · February 11th, 2010, 23:30

OK this is the wierdest shit I have ever seen, i have a KWA 1911, and i put nierbee wood grips on it, and the trigger sticks back for a second or 2 after firing, take the grips off, and it works... WTFBBQ? since when does a grip affect the trigger mechanism? I've taken the gun down completely and there is nothing wrong with it...

again, all I can say is WTFBBQ?

YouTube- DSCI2237.ASF

AngelusNex · February 11th, 2010, 23:38

It's putting a squeeze on the plastic frame. I notice mine does this when i get a good proper real steal grip on in, there can't be any pressure, try leaving the top screws a little loose.

Thenooblord · February 11th, 2010, 23:40

i dont even have to put the screws in at all, i just put the grip on and it jams up

AngelusNex · February 11th, 2010, 23:46

Quote:

Originally Posted by Thenooblord

i dont even have to put the screws in at all, i just put the grip on and it jams up

Now that's fucked..... Grips are cursed. Only one solution, Salt+Fire.

Thenooblord · February 11th, 2010, 23:46

LOL, I'd rather not...

stupid video not loading >.>

Slono · February 11th, 2010, 23:56

Does this happen with the stock grips?

Thenooblord · February 11th, 2010, 23:59

no

Assault Pioneer · February 12th, 2010, 00:02

so your just holding the grip into place with normal pressure of your hand holding it?

thats fuckin weird

look and see if the sides of the triger where it comes out of the gun and the areas that go into it while the trigger is pulled, see if theres rubbing there after you put the grip on.

if so take the gun apart and sand away at that hole just a wee little

Slono · February 12th, 2010, 00:05

Are the grips recessed properly to mate perfectly with the bushings? If they're not, its possible that they're putting pressure on your frame causing it to cave in a slight bit.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

February 11th, 2010, 23:56	#6
Slono Slow mo. Trader rating Join Date: Aug 2009 Location: GTA	Does this happen with the stock grips? __________________ The ultimate measure of a man is not where he stands in moments of comfort and convenience, but where he stands at times of challenge and controversy. - Martin Luther King, Jr.

February 12th, 2010, 00:05	#9
Slono Slow mo. Trader rating Join Date: Aug 2009 Location: GTA	Are the grips recessed properly to mate perfectly with the bushings? If they're not, its possible that they're putting pressure on your frame causing it to cave in a slight bit. __________________ The ultimate measure of a man is not where he stands in moments of comfort and convenience, but where he stands at times of challenge and controversy. - Martin Luther King, Jr.

February 11th, 2010, 23:38	#2
AngelusNex formerly Sepulcrum Trader rating Join Date: May 2007 Location: Kingston,ON, aka Funkasia	It's putting a squeeze on the plastic frame. I notice mine does this when i get a good proper real steal grip on in, there can't be any pressure, try leaving the top screws a little loose.

1911 grips = gun not working? WTF?

Doctor's Corner