(question) will g19 and g18 part be compatible

[bleaches]

my g19 #87 hammer hook has snapped like i mentioned a while ago. however, i managed to get the same part but for g18. so instead of being one piece its split into two.

will it still work? because i took apart the gun...but now cant put it back together lol...now even lookin at the diagram because i took it apart in such a hurry. is there ne one that can provide some photo help in how to put it back together? :innocent:

[ILLusion]

it shouldn't work, but maybe you can figure something weird out. Here's the diagram for a G17, which functionally, is exactly the same. Some of the part numbers are slightly different, however:

http://www.wgcshop.com/gun-folder/ksc-g17-install.htm

You'll need to get an oem or aftermarket replacement for that exact part.

http://www.wgcshop.com/WGC_Shop/images/grs_pt_g1783.jpg
GRS-PT-G1783 GRS Reinforced Parts for KSC G17 ( No. 83 )

I can get you that part.

[bleaches]

im guessin #78 hooks onto the small spring 79 nd inbetween 74 and 83 rite? i just have a really hard time either puttin it together or not doing the rite thing at all lol

[ILLusion]

uhh... i strongly suggest you bring it to someone who knows how to do it.

yes, 78 connects to 79, 79 connects to pin 80.
part 78 sits inside 83 and peeks through the square hole in #73.

Part 74 is above the location.