Axis Face Protection

T.Smith · April 22nd, 2013, 16:32

I enjoy wearing my Stahlhelm out to events (Meaning that regular mesh masks are either uncomfortable, or don't fit), but after an incident last year, I'd like to figure out a face mask system. Lost the tops of two teeth while the Allies attempted to storm the beaches.

I'm thinking of figuring out a system that will attach to the leather chin strap of my Stahlhelm, and only really cover my mouth. Anyone seen anything similiar or attempted something? I'd like to avoid re-inventing the wheel, unless I must.

Nova316 · April 22nd, 2013, 17:05

Check with Tim at Impact, he has a teeth guard that just covers the mouth. It attaches onto the Chinstrap of the Ops-core. He might be able to mod it to fit the Stahlhelm or even Justin Styler might be able to make you something

T.Smith · April 22nd, 2013, 17:19

Alright, I'll pop on in and see what Tim has. Right near work. I'd imagine, even if he can't, it might just require a little bit of canvas strapping, and my canvas needle.

chtomman · April 22nd, 2013, 19:37

I don't use , but it's fit good http://airsoftdepot.ca/catalog/produ...ucts_id=1630.I have always near me in case that will become its too HOT.
A nother possibility , I don't try it. http://airsoftdepot.ca/catalog/produ...oducts_id=1580.
excuse my english it's not good.
a+

T.Smith · April 22nd, 2013, 19:46

Danke, Kamerad. My German and French aren't too good, so don't you worry!

I have one similar to the first but the fit is terrible and uncomfortable. I had to do some extreme metal shaping for it to fit. If I were to cut it down to remove the nose protection, and attach it to the Stahlhelm chin strap, it might be better.

Scumdogcraig · April 22nd, 2013, 20:07

A friend of mine has the "gas mask" linked above. i would stay the hell away from that as its of incredibly poor quality and i wouldnt trust it to stop a spitball let alone anything coming out of an airsoft gun.

Fuji · April 22nd, 2013, 20:13

I've seen pics of some guys over in the UK wearing this type of mask. Not sure about the fogging though. It can be trimmed to fit your goggle shape and even painted for a more realistic look.
http://shop.ehobbyasia.com/andax-wor...ansparent.html

.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

April 22nd, 2013, 16:32	#1
T.Smith Trader rating Join Date: May 2004 Location: Kelowna, BC	Axis Face Protection I enjoy wearing my Stahlhelm out to events (Meaning that regular mesh masks are either uncomfortable, or don't fit), but after an incident last year, I'd like to figure out a face mask system. Lost the tops of two teeth while the Allies attempted to storm the beaches. I'm thinking of figuring out a system that will attach to the leather chin strap of my Stahlhelm, and only really cover my mouth. Anyone seen anything similiar or attempted something? I'd like to avoid re-inventing the wheel, unless I must. __________________ I know the rare and obscure "Teufelhorne" Regiment handsignal. Age Verifier - Kelowna, BC and Area Last edited by T.Smith; April 22nd, 2013 at 16:41..

April 22nd, 2013, 17:19	#3
T.Smith Trader rating Join Date: May 2004 Location: Kelowna, BC	Alright, I'll pop on in and see what Tim has. Right near work. I'd imagine, even if he can't, it might just require a little bit of canvas strapping, and my canvas needle. __________________ I know the rare and obscure "Teufelhorne" Regiment handsignal. Age Verifier - Kelowna, BC and Area

April 22nd, 2013, 19:37	#4
chtomman formerly stefy2 Trader rating Join Date: Jan 2011 Location: Quelque part au Québec	I don't use , but it's fit good http://airsoftdepot.ca/catalog/produ...ucts_id=1630.I have always near me in case that will become its too HOT. A nother possibility , I don't try it. http://airsoftdepot.ca/catalog/produ...oducts_id=1580. excuse my english it's not good. a+ __________________ Sniper level 2 ( 8 august 2015 ) ww2Québec.org axis scharfschützen. A&K svt40 (2),A&K svd , A&K svd Lynx part custom, pps kar98k .

April 22nd, 2013, 17:05	#2
Nova316 Trader rating Join Date: Nov 2006 Location: Calgary	Check with Tim at Impact, he has a teeth guard that just covers the mouth. It attaches onto the Chinstrap of the Ops-core. He might be able to mod it to fit the Stahlhelm or even Justin Styler might be able to make you something

April 22nd, 2013, 19:46	#5
T.Smith Trader rating Join Date: May 2004 Location: Kelowna, BC	Danke, Kamerad. My German and French aren't too good, so don't you worry! I have one similar to the first but the fit is terrible and uncomfortable. I had to do some extreme metal shaping for it to fit. If I were to cut it down to remove the nose protection, and attach it to the Stahlhelm chin strap, it might be better. __________________ I know the rare and obscure "Teufelhorne" Regiment handsignal. Age Verifier - Kelowna, BC and Area Last edited by T.Smith; April 22nd, 2013 at 19:49..

April 22nd, 2013, 20:07	#6
Scumdogcraig Trader rating Join Date: Jun 2012 Location: London, On	A friend of mine has the "gas mask" linked above. i would stay the hell away from that as its of incredibly poor quality and i wouldnt trust it to stop a spitball let alone anything coming out of an airsoft gun.

April 22nd, 2013, 20:13	#7
Fuji Trader rating Join Date: May 2011 Location: Markham, Ontario	I've seen pics of some guys over in the UK wearing this type of mask. Not sure about the fogging though. It can be trimmed to fit your goggle shape and even painted for a more realistic look. http://shop.ehobbyasia.com/andax-wor...ansparent.html . __________________ *Ontario Airsoft WWII Re-enactors*

Axis Face Protection

WW1, WW2