![]() |
|
|
||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers |
Community
![]() |
News/Info
![]() |
International Retailers
![]() |
IRC | Today's Posts |
![]() |
|
Thread Tools |
![]() |
#1 |
Gas failure of KJW P226 Mag
I searched through other threads and couldn't find an answer to this so I'm hoping someone can help me out. I'm playing with a TM P226 but with a KJ mag, it works great for the first 3/4 of the mag and then just stops shooting. It's been doing this for a while so I've tried to see if there's a leak and I haven't found one. I also make sure it's full but it always seems to run out at the same point. Any help would be greatly appreciated!
|
|
![]() |
![]() |
![]() |
#2 |
Sounds like that's just the gas capacity.
|
|
![]() |
![]() |
![]() |
#3 |
+1 to Styrak.
|
|
![]() |
![]() |
![]() |
#4 |
Yea, the P226 doesn't have a lot of capacity at all. All you can do to improve it is ensure your seals are tight. To test for a leak, place the mag in lukewarm water and watch for bubbles, but your mag sounds fine.
__________________
Airsoft Armory Joe Burton President/C.E.O Avid Headhunter "Call me Sandman, I'll put em all to sleep." |
|
![]() |
![]() |
![]() |
#5 |
aka coachster
|
also consider the conditions you are playing in. colder temps will decrease the efficiency and end up using more gas per shot.
|
![]() |
![]() |
![]() |
#6 |
Thanks for all the help!
|
|
![]() |
![]() |
![]() ![]() |
|
Bookmarks |
Thread Tools | |
|
|
![]() |