mag feeding help.

bareass · January 5th, 2011, 16:25

I'm not sure if this is where to put this. i tried searching but couldn't find anything.

i have star Pmags, they feed quite well, but i need to hold the mag forward/upish or esle it won't feed at all. i know people use tape to help this, but what's the best method? where should the shimming go? what material should i use?

thanks in advanced!

R.I.T.Z · January 5th, 2011, 16:27

velcro
in the magwell
along the back where the trigger guard area is

audi_bhoy · January 5th, 2011, 19:11

RITZ said it all! Best trick IMO !

bareass · January 6th, 2011, 01:16

velcro huh?

any others, i'll try it, but would like to see other options.

zone 69 · January 6th, 2011, 08:56

Or a little black tape on the bottom of the mech-box and on the top/rear of the mags.

audi_bhoy · January 6th, 2011, 10:34

Velcro is definitely the best way, it is smooth so you won't need to force the mag, while the little pines will push the mag forward enough to allow it to feed properly. It may sounds weird, but it definitely works! Just cut le widht of the middle groove and glue it there!

bareass · January 6th, 2011, 19:38

pines?
do you use the hook side or he felt side?

5kull · January 14th, 2011, 21:46

You can use either one, but the male (hooks) works great for me. A friend of mine used the felt side and likes it

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

January 5th, 2011, 16:25	#1
bareass Trader rating Join Date: Jan 2010 Location: Windsor Ontario	mag feeding help. I'm not sure if this is where to put this. i tried searching but couldn't find anything. i have star Pmags, they feed quite well, but i need to hold the mag forward/upish or esle it won't feed at all. i know people use tape to help this, but what's the best method? where should the shimming go? what material should i use? thanks in advanced!

January 5th, 2011, 16:27	#2
R.I.T.Z Crackers Trader rating Join Date: Mar 2009 Location: The Shwa	velcro in the magwell along the back where the trigger guard area is

January 5th, 2011, 19:11	#3
audi_bhoy Trader rating Join Date: Mar 2009 Location: Trois-Rivières	RITZ said it all! Best trick IMO !

January 6th, 2011, 01:16	#4
bareass Trader rating Join Date: Jan 2010 Location: Windsor Ontario	velcro huh? any others, i'll try it, but would like to see other options.

January 6th, 2011, 08:56	#5
zone 69 Trader rating Join Date: Sep 2006 Location: KELOWNA , B.C CANADA, PLANET EARTH	Or a little black tape on the bottom of the mech-box and on the top/rear of the mags.

January 6th, 2011, 10:34	#6
audi_bhoy Trader rating Join Date: Mar 2009 Location: Trois-Rivières	Velcro is definitely the best way, it is smooth so you won't need to force the mag, while the little pines will push the mag forward enough to allow it to feed properly. It may sounds weird, but it definitely works! Just cut le widht of the middle groove and glue it there!

January 6th, 2011, 19:38	#7
bareass Trader rating Join Date: Jan 2010 Location: Windsor Ontario	pines? do you use the hook side or he felt side?

January 14th, 2011, 21:46	#8
5kull Trader rating Join Date: Jun 2009	You can use either one, but the male (hooks) works great for me. A friend of mine used the felt side and likes it

mag feeding help.

Accessories Discussion