|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
December 27th, 2009, 16:37 | #1 |
Maps
Just to get a new topic going here...
I've been to a few fields with a variety of different maps. At one, a hand drawn, roughly to scale image of the surrounding area... At another, a blown up satellite photo from Google. Is there any place to reliably get topographical or satellite maps of populated areas? The field I typically play at is in Niagara-area... I'm getting close to drawing out a map.
__________________
The Devil's Bench - Gaming Cafe, Brantford, ON. |
|
December 27th, 2009, 17:43 | #2 |
Le Roi des poissons d'avril
|
http://www.nrcan-rncan.gc.ca/com/index-fra.php
Canada topographic maps. I use it all the time. Not 100% reliable, but still the best, free, starting point to map an erea. I bough up to date topographic maps of where I usually play or trek, and the online maps are close enough. They just lack important data, such as magnetic declinaison. I learned how to use a topographic map and compas. Now, with a protractor, I can pinpoint spots with UTM scales, wich are GPS compatible points. If enough people are using this method in large games, I predect a HUGE improvement on milsim management. My next large milsim will have this implemented.
__________________
Vérificateur d'âge: Terrebonne |
December 27th, 2009, 20:45 | #3 |
likes touching tralalas
|
There the english version http://www.nrcan-rncan.gc.ca/com/index-eng.php
Thanks for this link fox_111, but I am quite lost right now, where do you find the topo maps?
__________________
EF-02 SEMPER FI
Last edited by Yannos; December 27th, 2009 at 20:50.. |
December 28th, 2009, 18:38 | #4 |
Le Roi des poissons d'avril
|
Here
http://atlas.nrcan.gc.ca/site/english/maps/topo/map It was simple a following the links to toporama.
__________________
Vérificateur d'âge: Terrebonne |
January 5th, 2010, 19:02 | #5 |
Anyone know a place where you can get maps printed on tyvek for a decent price?
Oborous |
|
January 5th, 2010, 19:59 | #6 |
Herr ScheißeLiebhaber
|
Try mapsherpa.com?
|
January 5th, 2010, 20:10 | #7 | |
Le Roi des poissons d'avril
|
Quote:
You can have your map printed and then plastified. Cost about 20-30$ depending on the map. A typical topographic map cost 15$. Check your yellowpage book or whatever it's called to find your local map dealer. Online maps are often more expensive, because they are not a map dealer, juste a retailler.
__________________
Vérificateur d'âge: Terrebonne |
|
January 5th, 2010, 23:01 | #8 |
If you want topo maps of the Niagara area, go to Peninsula Press on Bunting Rd in St Catharines. They did have tons of topos and waterways charts as well (been a couple years since I was in there). The prices weren't too bad, I think less than $10 a sheet.
|
|
January 6th, 2010, 01:52 | #9 |
Staples.
That was easy.
__________________
86 Tactics Change. |
|
January 6th, 2010, 12:19 | #10 | |
Quote:
Tyvek is extremely durable -and- flexible, it folds down really well and if you're in a hurry, just stuff the map into a pocket. I saw a post on... hmm, maybe gear scout which reminded me of SERE maps that I've seen (not to say all SERE maps) have been printed on tyvek. I think Rite in the Rain paper is a tyvek derivative, and may just end up doing an 11"x17" printed map that way. Oborous |
||
January 6th, 2010, 14:08 | #11 |
Le Roi des poissons d'avril
|
Ok I now know what you mean.
Some money notes are made like this. (Australia if I remember right) Never seen maps like this, but I'd like my maps on Tyvek now hehe.
__________________
Vérificateur d'âge: Terrebonne |
January 7th, 2010, 14:18 | #12 |
Here is an example of a Tyvek map that shows how foldable/scrunchable it is.
|
|
January 12th, 2010, 11:02 | #13 |
Printing on Tyvek
If I had to print a map on a special material, I would try to find a local printing office that has a flatbed digital printer... these things can print on almost any kind of material such as fabric, plastic sheets or metal plates, as long as its flat and thin.
|
|
January 12th, 2010, 13:51 | #14 |
Le Roi des poissons d'avril
|
I think that a regular map in a plastic carrying case is enough for most people. All those special custom project could make your map cost as much as 50$ and up for something that is either free or bellow 20$.
__________________
Vérificateur d'âge: Terrebonne |
January 12th, 2010, 15:08 | #15 |
I agree. Personally, I would go for a regular map... I'm just saying that's a possibility.
|
|
|
Bookmarks |
Thread Tools | |
|
|