Airsoft Canada - View Single Post - Can A JG M4 Gearbox withstand a madbull m120?

RadioMan · April 11th, 2009, 13:09

Ok, I've concluded that I'll just not use the spring, but I'll upgrade other areas of the gearbox to make up for it. With the following upgrades will i be around 400 FPS?
-Mad Bull 6.03 Tightbore barrel
-G&P M4/M16 Hop-up Unit
-Modify Bearing Spring Guide - V2
-Modify 6mm Stainless Steel Bushings - Double Oil Channel
-MASK Pro Cylinder Head V2

Those will all fit in my gun correct?
And while trying to install the tightbore barrel on my own, I failed and bent the wire shield a bit. Will that cause my gun to break down in anyway?
And with these upgrades, I should have the range (if not more) of a stock JG M16 right?

Thank you so much!

April 11th, 2009, 13:09	#7
RadioMan Banned Trader rating Join Date: Jan 2008 Location: Winnipeg	Ok, I've concluded that I'll just not use the spring, but I'll upgrade other areas of the gearbox to make up for it. With the following upgrades will i be around 400 FPS? -Mad Bull 6.03 Tightbore barrel -G&P M4/M16 Hop-up Unit -Modify Bearing Spring Guide - V2 -Modify 6mm Stainless Steel Bushings - Double Oil Channel -MASK Pro Cylinder Head V2 Those will all fit in my gun correct? And while trying to install the tightbore barrel on my own, I failed and bent the wire shield a bit. Will that cause my gun to break down in anyway? And with these upgrades, I should have the range (if not more) of a stock JG M16 right? Thank you so much!