Quote:
Originally Posted by Skladfin
no, the KWA hop up unit is not TM compatible. from the outside its identical, but try to compare them both side to side looking through the nozzle side.
you will see a slot on top of the KWA hop up unit, as for the air seal nozzle inside the gearbox, it has a slot on top of it to run inside that hop up unit.
the TM does not have that slot for the nozzle to run in, so it wont go forward causing massive BB jam.
|
You're completely right! I had forgot about the nozzle with the ridge along the top of it!!
If you swapped both the nozzle and the hopup unit I believe it would work.