Airsoft Canada - View Single Post - magazine for KWA M4-tac

m102404 · September 3rd, 2008, 10:47

The KA mags are fine if you tweak the bb retention hook a little. As described, with a small file. Takes about 5 seconds per mag once you get the sense of how much needs to be taken off. There's 2 other threads (I think searching for KA or King Arms mags not feeding will find them) about what to do.

Gun Runner...the KWA is a 2 piece split hopup design...similar (and I think interchangeable with) to the stock TM design. So any split design should work. ****EDIT**** See Skladfin's clarification below for the nozzle differences!!!

Alternatively, for you, it'd be easy enough to dremel out the small area to make room for a one piece metal hopup. I'm not sure why they did it that way...but they did.

Tys

September 3rd, 2008, 10:47	#9
m102404 Tys Trader rating Join Date: Apr 2006 Location: Toronto	The KA mags are fine if you tweak the bb retention hook a little. As described, with a small file. Takes about 5 seconds per mag once you get the sense of how much needs to be taken off. There's 2 other threads (I think searching for KA or King Arms mags not feeding will find them) about what to do. Gun Runner...the KWA is a 2 piece split hopup design...similar (and I think interchangeable with) to the stock TM design. So any split design should work. **EDIT** See Skladfin's clarification below for the nozzle differences!!! Alternatively, for you, it'd be easy enough to dremel out the small area to make room for a one piece metal hopup. I'm not sure why they did it that way...but they did. Tys Last edited by m102404; September 3rd, 2008 at 11:15..