|
I know you have reseated the connections you mentioined that. I had a problem with mine. And what had happened was a wiring to the connector was off. Its not soldered to those contacts or anything.
The part you plug into the fake magwell was the part I had to take apart. It had 4 phillips screws in it. Wasn't a bit deal to take the cover off and see that there was no connection.
Have you tried testing those two big connections to ensure there is actually power coming from the box mag? You just need a little light or a tester or something. Or even try arcing it I suppose you could do to see if you have spark.
I didn't test mine but when I took the cover off I could see the wire was no where near the place it was supposed to be. heh
Maybe this is your problem.
|