[johnnyrico]

Hey everyone.

I have been seriously considering getting an M3 Super 90.

I have read quite abit about them and I am all but sold on them except for the nozzle breaking issue.

So I was just wondering what are the opinions of any one who has owned either the TM M3 Super 90 (short or long) and the TM spas 12's regarding the nozzle issue / reliability.

To the people who have owned them :

Did you have the nozzle breaking issue?

If so did the problem occur soon after getting the gun? Also depending on if you got the gun new or used?

All the information that I have read indicates that the nozzle is difficult to repair and getting the replacement parts difficult to track down.

So I figured I would ask the people who have had them, to share their experiences on just how quickly and or likely it is for the nozzle issue to occur.

I am aware that airsoft is an expensive hobby.

I am just weary of spending $375.00 CAD on a gun, and that has this potential issue. I figured getting feedback from some past / present owners might prove fruitful.

Any input from people who are knowledgeable about the guns and their nozzle problems, or anyone who has experiences concerning this, the information would be most welcome.

Thanks everybody.

Rico