Airsoft Canada - View Single Post - Rattle after shimming and testing the gears spin

stephanmmjohn · March 24th, 2018, 09:31

Hello, first post!

So after shimming for countless hours following guides, I am getting a rattle when I spin the gears with the gear box in space with a couple screws.

There's no grease in the GB yet, and nothing else but shims and gears and bushing. I'm thinking the bushings might be too high since I left them stock (CYMA Gear box and bushing) so I'm going to take a look at that tomorrow. I might have to sand them down but if I shim right would that cause a rattle still?

Any help or advice would be appreciated. Thanks.

March 24th, 2018, 09:31	#1
stephanmmjohn Trader rating Join Date: Feb 2018 Location: GTA	Rattle after shimming and testing the gears spin Hello, first post! So after shimming for countless hours following guides, I am getting a rattle when I spin the gears with the gear box in space with a couple screws. There's no grease in the GB yet, and nothing else but shims and gears and bushing. I'm thinking the bushings might be too high since I left them stock (CYMA Gear box and bushing) so I'm going to take a look at that tomorrow. I might have to sand them down but if I shim right would that cause a rattle still? Any help or advice would be appreciated. Thanks.