Quote:
Originally Posted by tylamarre
It looks like the adapter just takes the stock kjw valve recycled from the original mag. Could you replace that with a high flow valve? Or perhaps the supply air line is bottlenecking your pressure. Apparently v2 uses a thicker line but the reason was to prevent kinks. I'm working on a similar adapter for the WE G39 so I'm open to ideas.
|
There's not enough space for the gas to expand/build volume pressure in the cnc chamber. a 6mm line helps and you can use a high flow valve but the gas chamber is the root issue. i was at 430fps with green gas before the conversion, i suspect a high flow valve, different npas valve might increase it by a bit. I also think the 150% trigger might help with keeping the valve a bit more open initially might also increase.