Airsoft Canada - View Single Post

Rabbit · December 11th, 2013, 12:02

So i've been reading about the different variables involved in improving trigger response with an AEG as well as going over some older ASC posts to get a better understanding.

Most of the points revolve around a good neo motor, mosfets and gear ratios and small customizations like SS and swiss cheesing.

I'm not exactly ready to jump into the world of mosfets or 11.1v because ROF is not what i'm looking for and further more precise work is involved.

I'd really like to maintain 390fps (give or take) on the 7.4v's I use which are 1400mah 15c constant 25c burst (buffer tube lipos)

I'm looking at some neo torque motors currently but can't really decide between 16:1 or 13:1 gear sets

From what i've ready 13:1 is usually friendlier with s100/s110s but I can't find much chatter about 16:1's.

While trying to maintain an FPS closer to 400fps what should I factor in?

December 11th, 2013, 12:02	#1
Rabbit formerly FrankieCees, Remylebeau Trader rating Join Date: May 2010 Location: Hamilton	Improving Trigger Response? So i've been reading about the different variables involved in improving trigger response with an AEG as well as going over some older ASC posts to get a better understanding. Most of the points revolve around a good neo motor, mosfets and gear ratios and small customizations like SS and swiss cheesing. I'm not exactly ready to jump into the world of mosfets or 11.1v because ROF is not what i'm looking for and further more precise work is involved. I'd really like to maintain 390fps (give or take) on the 7.4v's I use which are 1400mah 15c constant 25c burst (buffer tube lipos) I'm looking at some neo torque motors currently but can't really decide between 16:1 or 13:1 gear sets From what i've ready 13:1 is usually friendlier with s100/s110s but I can't find much chatter about 16:1's. While trying to maintain an FPS closer to 400fps what should I factor in? Last edited by Rabbit; December 11th, 2013 at 12:14..