[Hectic]

The one issue im having with the spur is due to how the bushings sit in the box (they stick out a bit more then im used to) even without a shim the spur sits high. Like 0.5 of a mm maybe more off the bottom/left side of the box. Even without a shim i gotta shim the crap outta the sector (like 0.6 or so just so it doesnt rub the face of the large portion of the spur. Maybe ill try moving the bushings around and see if one sits better then the other to bring the sour a lil lowwer to the box so i only (hopefully) gotta use 0.15 or 0.25mm of shimming on the sector. I fear any more then the 0.6 or so i had in there ill have cutoff problems. And even with that it was running really close to the face of the spur. Ill try putting the high sitting bushing on the bevel and take more time shimming tonight and see if i can get it spinning more freely if its still a pain in the arse ima just grab a lonex shell. The last one i did went together so nicely and everything stayed put when closing the shell it was a joy to work on lol.